Documente tehnice
Specificatii
Marca
pico TechnologyAdapter Type
AC, Rogowski Coil
Maximum ac Current
3kA ac
Best Accuracy
±1 %
Safety Category
CAT III 1000 V, CAT IV 600V
Maximum Bandwidth
20kHz
Safety Category Voltage
600 V, 1000V
Bandwidth
20kHz
Model
TA325
Safety Category Level
CAT III, CAT IV
Tara de origine
United Kingdom
Detalii produs
Pico 30/300/3000 A AC 3-Phase Flex Current Probe with BNC Connector
The TA325 is a 3-phase AC current probe utilizing the Rogowski coil principle, used to measure AC current up to 3000 A when used with oscilloscopes, recorders or data loggers. The flexible probe allows current measurements on hard-to-reach conductors.
Rogowski coil technology has a couple of advantages over CT (current transformer) technology: when measuring multiple phases, the phase difference is small and predictable for higher frequency harmonic analysis applications; also, Rogowski coils do not have magnetic materials to saturate and so have excellent linearity.
The probes provide a 3 V full-scale AC output proportional to the current being measured with three selectable ranges: 30 A, 300 A and 3000 A.
When using the TA325 with a PicoScope 4444 differential scope, ensure that you purchase three TA271 D9-BNC adaptors. These can be found under the Accessories tab on this page.
Pico PC Based Instruments
Informatii indisponibile despre stoc
Incercati din nou mai tarziu
€ 756,98
Buc. (fara TVA)
€ 900,81
Buc. (cu TVA)
1
€ 756,98
Buc. (fara TVA)
€ 900,81
Buc. (cu TVA)
1
Documente tehnice
Specificatii
Marca
pico TechnologyAdapter Type
AC, Rogowski Coil
Maximum ac Current
3kA ac
Best Accuracy
±1 %
Safety Category
CAT III 1000 V, CAT IV 600V
Maximum Bandwidth
20kHz
Safety Category Voltage
600 V, 1000V
Bandwidth
20kHz
Model
TA325
Safety Category Level
CAT III, CAT IV
Tara de origine
United Kingdom
Detalii produs
Pico 30/300/3000 A AC 3-Phase Flex Current Probe with BNC Connector
The TA325 is a 3-phase AC current probe utilizing the Rogowski coil principle, used to measure AC current up to 3000 A when used with oscilloscopes, recorders or data loggers. The flexible probe allows current measurements on hard-to-reach conductors.
Rogowski coil technology has a couple of advantages over CT (current transformer) technology: when measuring multiple phases, the phase difference is small and predictable for higher frequency harmonic analysis applications; also, Rogowski coils do not have magnetic materials to saturate and so have excellent linearity.
The probes provide a 3 V full-scale AC output proportional to the current being measured with three selectable ranges: 30 A, 300 A and 3000 A.
When using the TA325 with a PicoScope 4444 differential scope, ensure that you purchase three TA271 D9-BNC adaptors. These can be found under the Accessories tab on this page.