Phoenix Contact MKDSN 2.5/ 2-5.08 HT BK Series PCB Terminal Block, 2-Contact, 5.08mm Pitch, Through Hole Mount, 1-Row,
Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
Phoenix ContactNumar contacte
2
Pitch
5.08mm
Number Of Rows
1
Montare
Through Hole
Terminal
Screw
Tip produs
Non Fused Terminal Block
Curent nominal
16A
Culoare
Black
Tensiune
320 V
Serie
MKDSN 2.5/ 2-5.08 HT BK
Lungime
9.5mm
Material
PA (Insulate)
Adancime
15mm
Latime
10.16mm
Tara de origine
France
Detalii produs
Phoenix Contact COMBICON MKDS 5.08mm High Temperature PCB Terminal Blocks
High temperature PCB terminal blocks are reflow solder tolerable and enable a greater proportion of a PCB to be populated and reflow soldered in one operation. Recommended as being suitable for temperature profiles based on EN 61 760-01. When used in reflow oven it is recommended that these components are heat treated at +125°C for 48 hours prior to use.
€ 5,20
€ 1,04 Buc. (Intr-un pachet de 5) (fara TVA)
€ 6,29
€ 1,258 Buc. (Intr-un pachet de 5) (cu TVA)
5
€ 5,20
€ 1,04 Buc. (Intr-un pachet de 5) (fara TVA)
€ 6,29
€ 1,258 Buc. (Intr-un pachet de 5) (cu TVA)
Informatii despre stoc temporar indisponibile
5
Informatii despre stoc temporar indisponibile
| Cantitate | Pret unitar | Per Pachet |
|---|---|---|
| 5 - 120 | € 1,04 | € 5,20 |
| 125 - 370 | € 0,89 | € 4,45 |
| 375 - 995 | € 0,79 | € 3,95 |
| 1000 - 1995 | € 0,72 | € 3,60 |
| 2000+ | € 0,68 | € 3,40 |
Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
Phoenix ContactNumar contacte
2
Pitch
5.08mm
Number Of Rows
1
Montare
Through Hole
Terminal
Screw
Tip produs
Non Fused Terminal Block
Curent nominal
16A
Culoare
Black
Tensiune
320 V
Serie
MKDSN 2.5/ 2-5.08 HT BK
Lungime
9.5mm
Material
PA (Insulate)
Adancime
15mm
Latime
10.16mm
Tara de origine
France
Detalii produs
Phoenix Contact COMBICON MKDS 5.08mm High Temperature PCB Terminal Blocks
High temperature PCB terminal blocks are reflow solder tolerable and enable a greater proportion of a PCB to be populated and reflow soldered in one operation. Recommended as being suitable for temperature profiles based on EN 61 760-01. When used in reflow oven it is recommended that these components are heat treated at +125°C for 48 hours prior to use.