Documente tehnice
Specificatii
Marca
ParkerConector A
G 1/2
Conector A
1/2in
Hydraulic Fitting Type
Hydraulic Blanking Plug
Material
Steel
Conector A
G
Conector A
Male
Presiune maxima de operare
400bar
Temperatura maxima de lucru
+100°C
Temperatura minima de lucru
-30°C
Detalii produs
Blanking Plug
Blanking plugs for ports, male metric thread. Manufactured from steel to BS5200 with a zinc chromated finish to give a high corrosion resistance (500 hours in salt spray test). All adaptors have a working temperature range -40 to +120°C (-3 to +120°C for plugs).
Warning
Hydraulic systems can work at high pressures, and fittings and adaptors can be subjected to extreme loadings such as vibration and uncontrolled pressure peaks. When choosing fittings or adaptors careful attention should be given to the technical specifications.
Informatii indisponibile despre stoc
Incercati din nou mai tarziu
€ 6,00
Buc. (Intr-un pachet de 5) (fara TVA)
€ 7,14
Buc. (Intr-un pachet de 5) (cu TVA)
5
€ 6,00
Buc. (Intr-un pachet de 5) (fara TVA)
€ 7,14
Buc. (Intr-un pachet de 5) (cu TVA)
5
Cumpara in pachete mari
Cantitate | Pret unitar | Per Pachet |
---|---|---|
5 - 20 | € 6,00 | € 30,00 |
25 - 45 | € 5,50 | € 27,50 |
50 - 120 | € 5,27 | € 26,35 |
125+ | € 5,11 | € 25,55 |
Documente tehnice
Specificatii
Marca
ParkerConector A
G 1/2
Conector A
1/2in
Hydraulic Fitting Type
Hydraulic Blanking Plug
Material
Steel
Conector A
G
Conector A
Male
Presiune maxima de operare
400bar
Temperatura maxima de lucru
+100°C
Temperatura minima de lucru
-30°C
Detalii produs
Blanking Plug
Blanking plugs for ports, male metric thread. Manufactured from steel to BS5200 with a zinc chromated finish to give a high corrosion resistance (500 hours in salt spray test). All adaptors have a working temperature range -40 to +120°C (-3 to +120°C for plugs).
Warning
Hydraulic systems can work at high pressures, and fittings and adaptors can be subjected to extreme loadings such as vibration and uncontrolled pressure peaks. When choosing fittings or adaptors careful attention should be given to the technical specifications.