Neutrik Cable Mount XLR Connector, Male, 50 V, 5 Way, Silver Plating
Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
NeutrikNumar contacte
5
Subtip
Male
Montare
Cable Mount
Body Orientation
Straight
Placa contact
Silver
Housing Material
Zinc
Terminal
Solder
Curent nominal
7.5A
Tensiune
50 V
Material de contact
Brass
Frecventa minima de auto-rezonanta
-30°C
Temperatura maxima de lucru
+80°C
Tara de origine
Liechtenstein
Detalii produs
X Series XLR Cable Connectors
Precision engineered audio connectors from Neutrik. Their construction ensures reliable connection for both power and low-level signal circuitry.
The Connector/Cable assembly is straightforward, employing a minimal number of parts with no assembly screws required. Parts are polarised and securely fitted, thereby eliminating connector noise. Available in either nickel or KTL coating, the cable mounting parts have a self adjusting strain relief for cable diameters between 3 and 8 mm, and mated connectors are secured by a latch.
This product has dual use terminals which can either be soldered or crimped for increased choice and ease of connectivity.
For type MP see Stock number: 543-591 and for type FP1 Stock number: 543-579.
Warning
Not to be used as mains connectors
P.O.A.
1
P.O.A.
Informatii despre stoc temporar indisponibile
1
Informatii despre stoc temporar indisponibile
Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
NeutrikNumar contacte
5
Subtip
Male
Montare
Cable Mount
Body Orientation
Straight
Placa contact
Silver
Housing Material
Zinc
Terminal
Solder
Curent nominal
7.5A
Tensiune
50 V
Material de contact
Brass
Frecventa minima de auto-rezonanta
-30°C
Temperatura maxima de lucru
+80°C
Tara de origine
Liechtenstein
Detalii produs
X Series XLR Cable Connectors
Precision engineered audio connectors from Neutrik. Their construction ensures reliable connection for both power and low-level signal circuitry.
The Connector/Cable assembly is straightforward, employing a minimal number of parts with no assembly screws required. Parts are polarised and securely fitted, thereby eliminating connector noise. Available in either nickel or KTL coating, the cable mounting parts have a self adjusting strain relief for cable diameters between 3 and 8 mm, and mated connectors are secured by a latch.
This product has dual use terminals which can either be soldered or crimped for increased choice and ease of connectivity.
For type MP see Stock number: 543-591 and for type FP1 Stock number: 543-579.
Warning
Not to be used as mains connectors