Neutrik Cable Mount XLR Connector, Female, 50 V, 3 Way, Silver over Nickel Plating
Documente tehnice
Specificatii
Marca
NeutrikNumar contacte
3
Subtip
Female
Montare
Cable Mount
Body Orientation
Straight
Placa contact
Silver over Nickel
Housing Material
Zinc
Terminal
Solder
Curent nominal
16A
Tensiune
50 V
Material de contact
Bronze
Frecventa minima de auto-rezonanta
-30°C
Temperatura maxima de lucru
+80°C
Tara de origine
Liechtenstein
Detalii produs
X Series XLR Cable Connectors
Precision engineered audio connectors from Neutrik. Their construction ensures reliable connection for both power and low-level signal circuitry.
The Connector/Cable assembly is straightforward, employing a minimal number of parts with no assembly screws required. Parts are polarised and securely fitted, thereby eliminating connector noise. Available in either nickel or black chrome finishes, the cable mounting parts have a self adjusting strain relief for cable diameters between 3 and 8 mm, and mated connectors are secured by a latch.
This product has dual use terminals which can either be soldered or crimped for increased choice and ease of connectivity.
For type MP see Stock number: 543-591 and for type FP1 Stock number: 543-579.
Warning
Not to be used as mains connectors
Informatii indisponibile despre stoc
Incercati din nou mai tarziu
€ 5,99
Buc. (fara TVA)
€ 7,13
Buc. (cu TVA)
1
€ 5,99
Buc. (fara TVA)
€ 7,13
Buc. (cu TVA)
1
Cumpara in pachete mari
| Cantitate | Pret unitar |
|---|---|
| 1 - 4 | € 5,99 |
| 5 - 9 | € 5,48 |
| 10 - 24 | € 5,15 |
| 25 - 49 | € 4,86 |
| 50+ | € 4,53 |
Documente tehnice
Specificatii
Marca
NeutrikNumar contacte
3
Subtip
Female
Montare
Cable Mount
Body Orientation
Straight
Placa contact
Silver over Nickel
Housing Material
Zinc
Terminal
Solder
Curent nominal
16A
Tensiune
50 V
Material de contact
Bronze
Frecventa minima de auto-rezonanta
-30°C
Temperatura maxima de lucru
+80°C
Tara de origine
Liechtenstein
Detalii produs
X Series XLR Cable Connectors
Precision engineered audio connectors from Neutrik. Their construction ensures reliable connection for both power and low-level signal circuitry.
The Connector/Cable assembly is straightforward, employing a minimal number of parts with no assembly screws required. Parts are polarised and securely fitted, thereby eliminating connector noise. Available in either nickel or black chrome finishes, the cable mounting parts have a self adjusting strain relief for cable diameters between 3 and 8 mm, and mated connectors are secured by a latch.
This product has dual use terminals which can either be soldered or crimped for increased choice and ease of connectivity.
For type MP see Stock number: 543-591 and for type FP1 Stock number: 543-579.
Warning
Not to be used as mains connectors