Murrelektronik Limited EMPARRO Switched Mode DIN Rail Power Supply, 400V ac, 24V dc dc Output, 20A Output, 480W
Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Serie
EMPARRO
Tip produs
Switched Mode
Faza electrica
2, 3
Numar iesiri
1
Tensiune intrare
400V ac
AC or DC Output Voltage
dc
Tensiune iesire
24V dc
Curent iesire
20A
Dimensiuni
143 x 65 x 167mm
Inaltime
143mm
Adancime
167mm
Latime
65mm
Tensiune iesire
24 → 28V
Maximum Temperature
+70°C
Standarde
cULus, cULus Recognised, EN 55011 B, EN 60715, EN 60950-1, EN 61000-3-2, EN 61204-3, SEMI F47
Temperatura minima
-40°C
Montare
DIN Rail Mount
Caracteristici speciale
Optimum Performance, Reliable, Space Saving
MTBF
>950000h
Ripple And Noise
20mV ac
Tara de origine
Czech Republic
Detalii produs
Emparro Power Supply 1 and 3 Phase
Murrelektroniks Emparro SMPS units have an efficiency rate of up to 95% keeping power loss and energy consumption to a minimum saving you money.
A higher efficiency rating results in minimum power loss, which equates to reduced operating costs. Emparros lower operating temperature reduces heat build-up in the cabinet ensuring that the device, and the components installed around it are not affected. Therefore, control cabinets with smaller dimensions can be used.
The device supplies up to 50% more power to start up higher loads and capacities without using another power supply.
The output voltage is controlled with a constant current when there is an overload. It is limited to 100% of the nominal current (or to 150% in Power boost mode). The power supply is then protected from damage.
Switch Mode - Murrelektronik
€ 417,11
€ 417,11 Buc. (fara TVA)
€ 504,70
€ 504,70 Buc. (cu TVA)
1
€ 417,11
€ 417,11 Buc. (fara TVA)
€ 504,70
€ 504,70 Buc. (cu TVA)
Informatii despre stoc temporar indisponibile
1
Informatii despre stoc temporar indisponibile
Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Serie
EMPARRO
Tip produs
Switched Mode
Faza electrica
2, 3
Numar iesiri
1
Tensiune intrare
400V ac
AC or DC Output Voltage
dc
Tensiune iesire
24V dc
Curent iesire
20A
Dimensiuni
143 x 65 x 167mm
Inaltime
143mm
Adancime
167mm
Latime
65mm
Tensiune iesire
24 → 28V
Maximum Temperature
+70°C
Standarde
cULus, cULus Recognised, EN 55011 B, EN 60715, EN 60950-1, EN 61000-3-2, EN 61204-3, SEMI F47
Temperatura minima
-40°C
Montare
DIN Rail Mount
Caracteristici speciale
Optimum Performance, Reliable, Space Saving
MTBF
>950000h
Ripple And Noise
20mV ac
Tara de origine
Czech Republic
Detalii produs
Emparro Power Supply 1 and 3 Phase
Murrelektroniks Emparro SMPS units have an efficiency rate of up to 95% keeping power loss and energy consumption to a minimum saving you money.
A higher efficiency rating results in minimum power loss, which equates to reduced operating costs. Emparros lower operating temperature reduces heat build-up in the cabinet ensuring that the device, and the components installed around it are not affected. Therefore, control cabinets with smaller dimensions can be used.
The device supplies up to 50% more power to start up higher loads and capacities without using another power supply.
The output voltage is controlled with a constant current when there is an overload. It is limited to 100% of the nominal current (or to 150% in Power boost mode). The power supply is then protected from damage.