Documente tehnice
Specificatii
Marca
MolexConector 1
QF-50 IDC
Ribbon Cable Type
Flat
Conector 2
QF-50 IDC
Conector 1
Female
Number of Ways
10
Tip conector 2
Female
Dimensiune celula
92321
Lungime
400mm
Culoare invelis
Grey
Dimensiune
7
Standarde
UL 2651
Tara de origine
Poland
Detalii produs
Molex 1.27mm QF-50 Single Beam IDC Ribbon Cable Connectors
1.27mm QF-50 IDC single beam vertical MIL/DIN version ribbon cable/wire trap female connectors with an upper housing pre-loaded with gold plated phosphor bronze IDC contacts. These QF-50 single beam ribbon cable/wire trap connectors are fully shrouded with a 90 degree cable entry angle and black UL94V-0 polyester housings which are fully polarized to ensure accurate mating. The mating pitch of these QF-50 single beam IDC ribbon cable connectors is 2.54mm, the termination interface is 1.27mm and accepts ribbon cable with a 26-28 AWG wire size.
Part numbers 92321-1xxx are QF-50 to QF-50 cable assemblies terminated by two female QF-50 connectors with a 28 AWG, 1.27mm pitch and a 7 strand ribbon cable. These QF-50 to QF-50 cable assemblies are available with a variety of connector sizes and ribbon cable lengths.
1.27mm Molex QF-50 Single Beam Ribbon Cable Connectors
Informatii indisponibile despre stoc
Incercati din nou mai tarziu
€ 3,77
Buc. (Intr-un pachet de 2) (fara TVA)
€ 4,486
Buc. (Intr-un pachet de 2) (cu TVA)
2
€ 3,77
Buc. (Intr-un pachet de 2) (fara TVA)
€ 4,486
Buc. (Intr-un pachet de 2) (cu TVA)
2
Documente tehnice
Specificatii
Marca
MolexConector 1
QF-50 IDC
Ribbon Cable Type
Flat
Conector 2
QF-50 IDC
Conector 1
Female
Number of Ways
10
Tip conector 2
Female
Dimensiune celula
92321
Lungime
400mm
Culoare invelis
Grey
Dimensiune
7
Standarde
UL 2651
Tara de origine
Poland
Detalii produs
Molex 1.27mm QF-50 Single Beam IDC Ribbon Cable Connectors
1.27mm QF-50 IDC single beam vertical MIL/DIN version ribbon cable/wire trap female connectors with an upper housing pre-loaded with gold plated phosphor bronze IDC contacts. These QF-50 single beam ribbon cable/wire trap connectors are fully shrouded with a 90 degree cable entry angle and black UL94V-0 polyester housings which are fully polarized to ensure accurate mating. The mating pitch of these QF-50 single beam IDC ribbon cable connectors is 2.54mm, the termination interface is 1.27mm and accepts ribbon cable with a 26-28 AWG wire size.
Part numbers 92321-1xxx are QF-50 to QF-50 cable assemblies terminated by two female QF-50 connectors with a 28 AWG, 1.27mm pitch and a 7 strand ribbon cable. These QF-50 to QF-50 cable assemblies are available with a variety of connector sizes and ribbon cable lengths.