Documente tehnice
Specificatii
Marca
MolexConector 1
QF-50 IDC
Ribbon Cable Type
Flat
Pitch
2.54mm
Conector 2
QF-50 IDC
Terminated/Unterminated
Terminated
Conector 1
Female
Number of Ways
10
Tip conector 2
Female
American Wire Gauge
28 AWG
Dimensiune celula
QF-50
Lungime
300mm
Conductor Strand Type
Stranded
Culoare invelis
Grey
Dimensiune
7
Standarde
UL 2651
Detalii produs
Molex 1.27mm QF-50 Single Beam IDC Ribbon Cable Connectors
1.27mm QF-50 IDC single beam vertical MIL/DIN version ribbon cable/wire trap female connectors with an upper housing pre-loaded with gold plated phosphor bronze IDC contacts. These QF-50 single beam ribbon cable/wire trap connectors are fully shrouded with a 90 degree cable entry angle and black UL94V-0 polyester housings which are fully polarized to ensure accurate mating. The mating pitch of these QF-50 single beam IDC ribbon cable connectors is 2.54mm, the termination interface is 1.27mm and accepts ribbon cable with a 26-28 AWG wire size.
Part numbers 92321-1xxx are QF-50 to QF-50 cable assemblies terminated by two female QF-50 connectors with a 28 AWG, 1.27mm pitch and a 7 strand ribbon cable. These QF-50 to QF-50 cable assemblies are available with a variety of connector sizes and ribbon cable lengths.
1.27mm Molex QF-50 Single Beam Ribbon Cable Connectors
Informatii indisponibile despre stoc
Incercati din nou mai tarziu
€ 5,02
Buc. (Intr-o punga de 500) (fara TVA)
€ 5,974
Buc. (Intr-o punga de 500) (cu TVA)
500
€ 5,02
Buc. (Intr-o punga de 500) (fara TVA)
€ 5,974
Buc. (Intr-o punga de 500) (cu TVA)
500
Documente tehnice
Specificatii
Marca
MolexConector 1
QF-50 IDC
Ribbon Cable Type
Flat
Pitch
2.54mm
Conector 2
QF-50 IDC
Terminated/Unterminated
Terminated
Conector 1
Female
Number of Ways
10
Tip conector 2
Female
American Wire Gauge
28 AWG
Dimensiune celula
QF-50
Lungime
300mm
Conductor Strand Type
Stranded
Culoare invelis
Grey
Dimensiune
7
Standarde
UL 2651
Detalii produs
Molex 1.27mm QF-50 Single Beam IDC Ribbon Cable Connectors
1.27mm QF-50 IDC single beam vertical MIL/DIN version ribbon cable/wire trap female connectors with an upper housing pre-loaded with gold plated phosphor bronze IDC contacts. These QF-50 single beam ribbon cable/wire trap connectors are fully shrouded with a 90 degree cable entry angle and black UL94V-0 polyester housings which are fully polarized to ensure accurate mating. The mating pitch of these QF-50 single beam IDC ribbon cable connectors is 2.54mm, the termination interface is 1.27mm and accepts ribbon cable with a 26-28 AWG wire size.
Part numbers 92321-1xxx are QF-50 to QF-50 cable assemblies terminated by two female QF-50 connectors with a 28 AWG, 1.27mm pitch and a 7 strand ribbon cable. These QF-50 to QF-50 cable assemblies are available with a variety of connector sizes and ribbon cable lengths.