Documente tehnice
Specificatii
Marca
MolexDimensiune celula
120086
Cross Sectional Area
0.25 mm²
Sheath Material
TPU
Lungime
2m
Culoare invelis
Black
Conector 1
M8
Conector 1
3
Tip conector 1
Female
Conector 2
Unterminated
Protejat
Unshielded
Curent nominal
3 A
Tensiune
60 V
Protectie IP
IP67
Diametru exterior
4.5mm
American Wire Gauge
24 AWG
Frecventa minima de auto-rezonanta
-25°C
Conductor Material
Brass
Temperatura maxima de lucru
+85°C
Temperatura de lucru
-25 → +85 °C
Conector 1
Female
Standarde
CSA, UL 2125
Cable Shape
Multicore
Detalii produs
Molex M8 Nano-Change WSOR Sensor Cable
From Molex, this Nano-Change cable assembly is designed to be resistant to Weld-Slag and Oil, and as such is well suited to industrial use. With a secure M8 connector at one end and terminating in a free-end pigtail at the other, this WSOR cable assembly is a versatile and reliable solution to sensor and automation connection applications, and boasts an impressive degree of environmental protection when mated.
Brad Harrison - M8
The Brad Harrison® range of connectors and splitter boxes have been principally designed for use in industrial applications. The Quick Disconnect® principle offers cost savings by enabling quick and simple replacement of either the sensors or cable, helping keep machine down time to a minimum. Designed for use in harsh environments, these connectors are available in re-wireable or pre-wired, factory moulded versions which are robust, compact and waterproof up to IP68. They are typically used for control system products such as proximity, limit and other forms of switches, but are equally at home in test, instrumentation and other electrical/electronic applications where the operating environment is less arduous.
Informatii despre stoc temporar indisponibile.
Incercati din nou mai tarziu
€ 8,64
Buc. (fara TVA)
€ 10,28
Buc. (cu TVA)
1
€ 8,64
Buc. (fara TVA)
€ 10,28
Buc. (cu TVA)
1
Cumpara in pachete mari
Cantitate | Pret unitar |
---|---|
1 - 4 | € 8,64 |
5 - 9 | € 7,94 |
10+ | € 7,49 |
Documente tehnice
Specificatii
Marca
MolexDimensiune celula
120086
Cross Sectional Area
0.25 mm²
Sheath Material
TPU
Lungime
2m
Culoare invelis
Black
Conector 1
M8
Conector 1
3
Tip conector 1
Female
Conector 2
Unterminated
Protejat
Unshielded
Curent nominal
3 A
Tensiune
60 V
Protectie IP
IP67
Diametru exterior
4.5mm
American Wire Gauge
24 AWG
Frecventa minima de auto-rezonanta
-25°C
Conductor Material
Brass
Temperatura maxima de lucru
+85°C
Temperatura de lucru
-25 → +85 °C
Conector 1
Female
Standarde
CSA, UL 2125
Cable Shape
Multicore
Detalii produs
Molex M8 Nano-Change WSOR Sensor Cable
From Molex, this Nano-Change cable assembly is designed to be resistant to Weld-Slag and Oil, and as such is well suited to industrial use. With a secure M8 connector at one end and terminating in a free-end pigtail at the other, this WSOR cable assembly is a versatile and reliable solution to sensor and automation connection applications, and boasts an impressive degree of environmental protection when mated.
Brad Harrison - M8
The Brad Harrison® range of connectors and splitter boxes have been principally designed for use in industrial applications. The Quick Disconnect® principle offers cost savings by enabling quick and simple replacement of either the sensors or cable, helping keep machine down time to a minimum. Designed for use in harsh environments, these connectors are available in re-wireable or pre-wired, factory moulded versions which are robust, compact and waterproof up to IP68. They are typically used for control system products such as proximity, limit and other forms of switches, but are equally at home in test, instrumentation and other electrical/electronic applications where the operating environment is less arduous.