Molex Premise Networks ST to SC Duplex Multi Mode OM3 Fibre Optic Cable, 50/125μm, Aqua, 2m
Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Conector 1
ST
Lungime
2m
Conector 2
SC
Propagation Mode
Multi Mode
Terminated/Unterminated
Terminated
Core Diameter
50/125µm
Culoare invelis
Aqua
Cable Construction
Duplex
Fibre Type
OM3
Temperatura maxima de lucru
+85°C
Attenuation
1.5 dB
Sheath Material
Low Smoke Zero Halogen (LSZH)
Frecventa minima de auto-rezonanta
-40°C
Serie
91
Minimum Bend Radius
30 mm
Maximum Pulling Tension
100N
Tara de origine
Poland
Detalii produs
Higher Bandwidth
Multimode fibre fully supports 850 nm (SX) serial 10 Gb/s applications over 300 m. An effective bandwidth of 2000 MHz/km at 850 nm under laser launch is ensured with conformance to the 850 nm Differential Mode Delay test method.,The assemblies are manufactured in accordance with the specifications defined within BS:7718.
€ 27,56
€ 27,56 Buc. (fara TVA)
€ 33,35
€ 33,35 Buc. (cu TVA)
1
€ 27,56
€ 27,56 Buc. (fara TVA)
€ 33,35
€ 33,35 Buc. (cu TVA)
Informatii despre stoc temporar indisponibile
1
Informatii despre stoc temporar indisponibile
| Cantitate | Pret unitar |
|---|---|
| 1 - 14 | € 27,56 |
| 15 - 49 | € 25,54 |
| 50+ | € 23,79 |
Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Conector 1
ST
Lungime
2m
Conector 2
SC
Propagation Mode
Multi Mode
Terminated/Unterminated
Terminated
Core Diameter
50/125µm
Culoare invelis
Aqua
Cable Construction
Duplex
Fibre Type
OM3
Temperatura maxima de lucru
+85°C
Attenuation
1.5 dB
Sheath Material
Low Smoke Zero Halogen (LSZH)
Frecventa minima de auto-rezonanta
-40°C
Serie
91
Minimum Bend Radius
30 mm
Maximum Pulling Tension
100N
Tara de origine
Poland
Detalii produs
Higher Bandwidth
Multimode fibre fully supports 850 nm (SX) serial 10 Gb/s applications over 300 m. An effective bandwidth of 2000 MHz/km at 850 nm under laser launch is ensured with conformance to the 850 nm Differential Mode Delay test method.,The assemblies are manufactured in accordance with the specifications defined within BS:7718.