Molex Premise Networks ST to ST Duplex Multi Mode OM1 Fibre Optic Cable, 62.5/125μm, Orange, 2m
Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Conector 1
ST
Lungime
2m
Conector 2
ST
Propagation Mode
Multi Mode
Terminated/Unterminated
Terminated
Core Diameter
62.5/125µm
Culoare invelis
Orange
Cable Construction
Duplex
Fibre Type
OM1
Temperatura maxima de lucru
+85°C
Attenuation
1 dB
Sheath Material
Low Smoke Zero Halogen (LSZH)
Frecventa minima de auto-rezonanta
-40°C
Minimum Bend Radius
30 mm
Maximum Pulling Tension
100N
Serie
91
Tara de origine
Poland
Detalii produs
Higher Bandwidth
Multimode fibre fully supports 850 nm (SX) serial 10 Gb/s applications over 300 m. An effective bandwidth of 2000 MHz/km at 850 nm under laser launch is ensured with conformance to the 850 nm Differential Mode Delay test method.,The assemblies are manufactured in accordance with the specifications defined within BS:7718.
€ 49,39
€ 49,39 Buc. (fara TVA)
€ 59,76
€ 59,76 Buc. (cu TVA)
1
€ 49,39
€ 49,39 Buc. (fara TVA)
€ 59,76
€ 59,76 Buc. (cu TVA)
Informatii despre stoc temporar indisponibile
1
Informatii despre stoc temporar indisponibile
| Cantitate | Pret unitar |
|---|---|
| 1 - 14 | € 49,39 |
| 15 - 49 | € 46,87 |
| 50+ | € 42,83 |
Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Conector 1
ST
Lungime
2m
Conector 2
ST
Propagation Mode
Multi Mode
Terminated/Unterminated
Terminated
Core Diameter
62.5/125µm
Culoare invelis
Orange
Cable Construction
Duplex
Fibre Type
OM1
Temperatura maxima de lucru
+85°C
Attenuation
1 dB
Sheath Material
Low Smoke Zero Halogen (LSZH)
Frecventa minima de auto-rezonanta
-40°C
Minimum Bend Radius
30 mm
Maximum Pulling Tension
100N
Serie
91
Tara de origine
Poland
Detalii produs
Higher Bandwidth
Multimode fibre fully supports 850 nm (SX) serial 10 Gb/s applications over 300 m. An effective bandwidth of 2000 MHz/km at 850 nm under laser launch is ensured with conformance to the 850 nm Differential Mode Delay test method.,The assemblies are manufactured in accordance with the specifications defined within BS:7718.