Molex Premise Networks Cable Tester STP, UTP, SLT3S
Documente tehnice
Specificatii
Equipment Type
Cable Tester
Tip conector
STP, UTP
Model
SLT3S
Power Source
Battery
Battery Type
9V
Dimensiuni
146 x 58 x 38mm
Greutate
284g
Tip afisare
LED
Inaltime
144mm
Latime
60mm
Model
SLT3S
Tara de origine
United States
Detalii produs
Molex UTP and STP Cable Tester
From Molex the 33A-100-10 data wiring tester, designed to check the integrity of 2, 3 and 4 pair UTP and STP channels. With a unique 3-in-1 design the sturdy tester features built-in modular jack connectors for USOC, 568A and 568B wiring sequences.
The robust multi-function cable tester comprises of two handheld parts, the master unit and the remote unit. This provides a convenient method for end-to-end testing of pre-installed cabling. By connecting the master and the slave unit to each end of the cable the tester automatically verifies the correct wiring sequence. A continuously sequencing LED display gives a clear visual indication of any shorts opens, reversals and mis-wire within the wiring system
Powered by a 9-volt alkaline battery this portable tester is an essential piece of test equipment for any design, installation or test engineer’s toolbox
Informatii indisponibile despre stoc
Incercati din nou mai tarziu
€ 124,97
€ 124,97 Buc. (fara TVA)
€ 148,71
€ 148,71 Buc. (cu TVA)
1
€ 124,97
€ 124,97 Buc. (fara TVA)
€ 148,71
€ 148,71 Buc. (cu TVA)
1
Documente tehnice
Specificatii
Equipment Type
Cable Tester
Tip conector
STP, UTP
Model
SLT3S
Power Source
Battery
Battery Type
9V
Dimensiuni
146 x 58 x 38mm
Greutate
284g
Tip afisare
LED
Inaltime
144mm
Latime
60mm
Model
SLT3S
Tara de origine
United States
Detalii produs
Molex UTP and STP Cable Tester
From Molex the 33A-100-10 data wiring tester, designed to check the integrity of 2, 3 and 4 pair UTP and STP channels. With a unique 3-in-1 design the sturdy tester features built-in modular jack connectors for USOC, 568A and 568B wiring sequences.
The robust multi-function cable tester comprises of two handheld parts, the master unit and the remote unit. This provides a convenient method for end-to-end testing of pre-installed cabling. By connecting the master and the slave unit to each end of the cable the tester automatically verifies the correct wiring sequence. A continuously sequencing LED display gives a clear visual indication of any shorts opens, reversals and mis-wire within the wiring system
Powered by a 9-volt alkaline battery this portable tester is an essential piece of test equipment for any design, installation or test engineer’s toolbox