MikroElektronika Heart Rate 3 Click Heart Rate Sensor mikroBus Click Board for SFH7050
Documente tehnice
Specificatii
Marca
MikroElektronikaTehnologie senzor
Heart Rate Sensor
Featured Device
SFH7050
Clasificare
mikroBus Click Board
Kit Name
Heart Rate 3 Click
Detalii produs
Heart Rate 3 click mikroBUS™
The MikroElektronika Heart Rate 3 Click Board is an accessory board that provides a simple method of adding heart rate and pulse oximetry measurement hardware to a development platform.
Like all Click Boards the Heart Rate 3 Click fits the popular mikroBUS™ socket, creating a plug-in solution to add functionality, removing the need for hardware configuration.
The Heart Rate 3 Click Board utilises an Osram SFH7050 BioMon Sensor in combination with a TI AFE4404 Analogue Front End Maxim to take readings from a fingertip.
The SFH7050 emits green, red and infrared light from two LEDs into the skin, with the amount absorbed by the capillary blood sensed by a photodetector. The variation of the readings over time indicate the pulsing of blood, therefore the heart rate. Oxygen saturation can also be captured.
The AFE4404 then processes the data captured by the sensor, communicating with the target MCU over I2C. The AFE4404 is configurable and can be adapted for different lighting conditions and skin tones.
Click mikroBUS™ Biomedical Boards
Informatii indisponibile despre stoc
Incercati din nou mai tarziu
€ 38,57
Buc. (fara TVA)
€ 45,90
Buc. (cu TVA)
1
€ 38,57
Buc. (fara TVA)
€ 45,90
Buc. (cu TVA)
1
Documente tehnice
Specificatii
Marca
MikroElektronikaTehnologie senzor
Heart Rate Sensor
Featured Device
SFH7050
Clasificare
mikroBus Click Board
Kit Name
Heart Rate 3 Click
Detalii produs
Heart Rate 3 click mikroBUS™
The MikroElektronika Heart Rate 3 Click Board is an accessory board that provides a simple method of adding heart rate and pulse oximetry measurement hardware to a development platform.
Like all Click Boards the Heart Rate 3 Click fits the popular mikroBUS™ socket, creating a plug-in solution to add functionality, removing the need for hardware configuration.
The Heart Rate 3 Click Board utilises an Osram SFH7050 BioMon Sensor in combination with a TI AFE4404 Analogue Front End Maxim to take readings from a fingertip.
The SFH7050 emits green, red and infrared light from two LEDs into the skin, with the amount absorbed by the capillary blood sensed by a photodetector. The variation of the readings over time indicate the pulsing of blood, therefore the heart rate. Oxygen saturation can also be captured.
The AFE4404 then processes the data captured by the sensor, communicating with the target MCU over I2C. The AFE4404 is configurable and can be adapted for different lighting conditions and skin tones.