Microchip MCP3551DM-PCTL Delta Sigma ADC Demonstration Board Signal Conversion Development Kit
Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
MicrochipProduct Type
Signal Conversion Development Kit
Standards/Approvals
RoHS
Converter Type
ADC
Kit Name
Delta Sigma ADC
Resolution
22 bit
Clasificare
Demonstration Board
Utilizare cu
PICkit, MPLAB ICD 2
Featured Device
MCP3551
Detalii produs
MCP3551 Demonstration Board
This board is designed to demonstrate the MCP3551 22-Bit Delta-Sigma Analog-to-Digital (ADC) Converter performance using DataView™ software installed on a PC. The demo board can be used with MPLAB ICD 2, PICkit™ 1 Flash Starter Kit, or PICkit™ 2 for developing demonstration/evaluation firmware. Optionally, a second installed MCP3551 can be used with an optional stimulus board (sold separately).,The board is designed to evaluate the MCP3551 with minimum Printed Circuit Board (PCB) noise. The PCB layout practices low-noise design to reduce the signal noise as much as possible in order to demonstrate the 22-Bit performance of the MCP3551.
Analogue to Digital Converters - Microchip
Informatii despre stoc temporar indisponibile
€ 71,37
€ 71,37 Buc. (fara TVA)
€ 86,36
€ 86,36 Buc. (cu TVA)
1
€ 71,37
€ 71,37 Buc. (fara TVA)
€ 86,36
€ 86,36 Buc. (cu TVA)
Informatii despre stoc temporar indisponibile
1
Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
MicrochipProduct Type
Signal Conversion Development Kit
Standards/Approvals
RoHS
Converter Type
ADC
Kit Name
Delta Sigma ADC
Resolution
22 bit
Clasificare
Demonstration Board
Utilizare cu
PICkit, MPLAB ICD 2
Featured Device
MCP3551
Detalii produs
MCP3551 Demonstration Board
This board is designed to demonstrate the MCP3551 22-Bit Delta-Sigma Analog-to-Digital (ADC) Converter performance using DataView™ software installed on a PC. The demo board can be used with MPLAB ICD 2, PICkit™ 1 Flash Starter Kit, or PICkit™ 2 for developing demonstration/evaluation firmware. Optionally, a second installed MCP3551 can be used with an optional stimulus board (sold separately).,The board is designed to evaluate the MCP3551 with minimum Printed Circuit Board (PCB) noise. The PCB layout practices low-noise design to reduce the signal noise as much as possible in order to demonstrate the 22-Bit performance of the MCP3551.