Documente tehnice
Specificatii
Marca
MicrochipPhysical Network Type
100BaseTX, 10BaseT
Host Interface
Host Bus
IC Type
Controller IC
Network Interface
MDI, MDIX, MII, RMII
Communication Mode
Full Duplex, Half Duplex
Data Rate
100Mbps
Loopback Mode
Internal
Standard Supported
ANSI X3.263, IEEE 802.3, IEEE 802.3u
Montare
Surface Mount
Tip pachet
QFN
Numar pini
64
Auto-Negotiation
Yes
DMA Support
Yes
Typical Operating Supply Voltage
3.3 V
Dimensiuni
9 x 9 x 0.95mm
Temperatura minima de lucru
-40 °C
Temperatura maxima de lucru
+85 °C
Detalii produs
LAN9252 EtherCAT® Slave Controllers
The LAN9252 device from Microchip is a 2/3 port EtherCAT® slave controller with dual integrated Ethernet PHYs, each of which contain a full-duplex 100BASE-TX transceiver. The LAN9252 supports HP Auto MDI-X that allows the use of direct connect or cross-over LAN cables. 100BASE-FX is supported via an external fiber transceiver. Included is a 3 port EtherCAT® slave controller with 4K bytes of Dual Port memory (DPRAM), 4 SyncManagers, 3 Fieldbus Memory Management Units (FMMUs) and a 64-bit Distributed Clock. The LAN9252 supports 4 Process Data Interfaces - SPI/SQI, HBI and a 16 Bit Digital IO.
Ethernet Communications - Microchip
€ 2.849,60
€ 10,96 Each (In a Tray of 260) (fara TVA)
€ 3.391,02
€ 13,042 Each (In a Tray of 260) (cu TVA)
260
€ 2.849,60
€ 10,96 Each (In a Tray of 260) (fara TVA)
€ 3.391,02
€ 13,042 Each (In a Tray of 260) (cu TVA)
260
Informatii indisponibile despre stoc
Incercati din nou mai tarziu
Documente tehnice
Specificatii
Marca
MicrochipPhysical Network Type
100BaseTX, 10BaseT
Host Interface
Host Bus
IC Type
Controller IC
Network Interface
MDI, MDIX, MII, RMII
Communication Mode
Full Duplex, Half Duplex
Data Rate
100Mbps
Loopback Mode
Internal
Standard Supported
ANSI X3.263, IEEE 802.3, IEEE 802.3u
Montare
Surface Mount
Tip pachet
QFN
Numar pini
64
Auto-Negotiation
Yes
DMA Support
Yes
Typical Operating Supply Voltage
3.3 V
Dimensiuni
9 x 9 x 0.95mm
Temperatura minima de lucru
-40 °C
Temperatura maxima de lucru
+85 °C
Detalii produs
LAN9252 EtherCAT® Slave Controllers
The LAN9252 device from Microchip is a 2/3 port EtherCAT® slave controller with dual integrated Ethernet PHYs, each of which contain a full-duplex 100BASE-TX transceiver. The LAN9252 supports HP Auto MDI-X that allows the use of direct connect or cross-over LAN cables. 100BASE-FX is supported via an external fiber transceiver. Included is a 3 port EtherCAT® slave controller with 4K bytes of Dual Port memory (DPRAM), 4 SyncManagers, 3 Fieldbus Memory Management Units (FMMUs) and a 64-bit Distributed Clock. The LAN9252 supports 4 Process Data Interfaces - SPI/SQI, HBI and a 16 Bit Digital IO.