MENNEKES IP44 Red Cable Mount 3P + N + E Industrial Power Plug, Rated At 16A, 400 V,With Phase Inverter
Documente tehnice
Specificatii
Marca
MennekesCurent nominal
16A
Priza
Plug
Pole Format
3P + N + E
Tensiune nominala
400 V
Montare
Cable Mount
Subtip
Male
Body Orientation
Straight
Terminal
Screw Terminal
Protectie IP
IP44
Culoare
Red
Cable CSA
1 → 2.5mm²
Frecventa minima de auto-rezonanta
-25°C
Temperatura maxima de lucru
+55°C
Phase Inverter
Yes
Low Voltage
No
Tara de origine
Germany
Detalii produs
Phase Inverter Plug
The Phase inverter plug represents a novel solution for the problem of 3-phase rotating equipment turning in the wrong direction. Two of the phase contact pins are mounted on an insulated plate which can be rotated, but which is held by a pressure interlock when inserted into a socket. If the motor rotates in the wrong direction, then the interlock is simply depressed with a screwdriver and the insulated plate is rotated. This takes only seconds and the motor then turns in the correct direction. The switching of wires between terminals, which is time consuming and dangerous for untrained personnel, is no longer necessary.
Informatii indisponibile despre stoc
Incercati din nou mai tarziu
€ 70,39
Buc. (fara TVA)
€ 83,76
Buc. (cu TVA)
1
€ 70,39
Buc. (fara TVA)
€ 83,76
Buc. (cu TVA)
1
Cumpara in pachete mari
| Cantitate | Pret unitar |
|---|---|
| 1 - 4 | € 70,39 |
| 5+ | € 64,65 |
Documente tehnice
Specificatii
Marca
MennekesCurent nominal
16A
Priza
Plug
Pole Format
3P + N + E
Tensiune nominala
400 V
Montare
Cable Mount
Subtip
Male
Body Orientation
Straight
Terminal
Screw Terminal
Protectie IP
IP44
Culoare
Red
Cable CSA
1 → 2.5mm²
Frecventa minima de auto-rezonanta
-25°C
Temperatura maxima de lucru
+55°C
Phase Inverter
Yes
Low Voltage
No
Tara de origine
Germany
Detalii produs
Phase Inverter Plug
The Phase inverter plug represents a novel solution for the problem of 3-phase rotating equipment turning in the wrong direction. Two of the phase contact pins are mounted on an insulated plate which can be rotated, but which is held by a pressure interlock when inserted into a socket. If the motor rotates in the wrong direction, then the interlock is simply depressed with a screwdriver and the insulated plate is rotated. This takes only seconds and the motor then turns in the correct direction. The switching of wires between terminals, which is time consuming and dangerous for untrained personnel, is no longer necessary.