Megger MFT1721 Multifunction Tester, 100V , Earth Resistance Measurement With Wireless
Documente tehnice
Specificatii
Marca
MeggerLoop Impedance Test Type
2 Wire, 3 Wire
Automatic RCD Test
Yes
Model
MFT1721
RCD Ramp Test
Yes
Model
MFT1721
Non-Tripping
Yes
Insulation Test Voltage
100 V, 250 V, 500 V, 1000V
Maximum Voltage Measurement
600V
Test Type
Continuity
Earth Resistance Measurement
Yes
Downloadable Data
Yes
Interfata
Wireless
Continuity Test Current
200mA
RCD Test Type
A, AC, B, S
Protectie IP
IP54
Test Standards
EC 61010-1:2010, IEC 61010-031:2008, IEC 61010-30:2010, IEC 61557:2007
Inaltime
150mm
Temperatura de lucru
-10 → +55 °C
Greutate
1 (with Battery; Excluding Case)kg
Minimum Continuity Resistance
0.01Ω
Continuity Range
0.01 → 99.9 kΩ
Frecventa minima de auto-rezonanta
-10°C
Safety Category Level
CAT III, CAT IV
Tip priza
BS 1363, LT 300-EN-BS
Maximum Continuity Resistance
99.9kΩ
Safety Category Voltage
300 V, 600 V
Tensiune
10 → 600V
Battery Type
AA Alkaline
Safety Category
CAT III 600 V, CAT IV 300 V
Tip afisare
LCD
Temperatura maxima de lucru
+55°C
Power Source
Battery
Latime
235mm
Lungime
85mm
Dimensiuni
85 x 235 x 150mm
Tara de origine
United Kingdom
Detalii produs
Megger MFT1721 Multifunction Tester
The MFT1721 is part of the MFT1701 series from Megger whcih tests low voltage electrical installations to BS7671. Providing all the tests required to complete the necessary electrical certification for industrial, commercial, and domestic fixed wiring installations. The unique design allows it to be operated while mounted on the floor, a ladder-shelf, platform, and held or hung around the neck.
The MFT1721 includes full input protection and safety warnings when a hazardous voltage is present. If live voltages exist on a circuit during insulation or continuity testing, the voltage is displayed on the screen. If this voltage exceeds a safe level, further testing is inhibited, and a warning beep sounds.
Supplied with
MFT1721 - Tester, three wire lead set, mains test lead, switched probe, 12-month calibration certificate, warranty upgradeable to 3 years & moulded case
Informatii indisponibile despre stoc
Incercati din nou mai tarziu
€ 2.049,89
Buc. (fara TVA)
€ 2.439,37
Buc. (cu TVA)
1
€ 2.049,89
Buc. (fara TVA)
€ 2.439,37
Buc. (cu TVA)
1
Documente tehnice
Specificatii
Marca
MeggerLoop Impedance Test Type
2 Wire, 3 Wire
Automatic RCD Test
Yes
Model
MFT1721
RCD Ramp Test
Yes
Model
MFT1721
Non-Tripping
Yes
Insulation Test Voltage
100 V, 250 V, 500 V, 1000V
Maximum Voltage Measurement
600V
Test Type
Continuity
Earth Resistance Measurement
Yes
Downloadable Data
Yes
Interfata
Wireless
Continuity Test Current
200mA
RCD Test Type
A, AC, B, S
Protectie IP
IP54
Test Standards
EC 61010-1:2010, IEC 61010-031:2008, IEC 61010-30:2010, IEC 61557:2007
Inaltime
150mm
Temperatura de lucru
-10 → +55 °C
Greutate
1 (with Battery; Excluding Case)kg
Minimum Continuity Resistance
0.01Ω
Continuity Range
0.01 → 99.9 kΩ
Frecventa minima de auto-rezonanta
-10°C
Safety Category Level
CAT III, CAT IV
Tip priza
BS 1363, LT 300-EN-BS
Maximum Continuity Resistance
99.9kΩ
Safety Category Voltage
300 V, 600 V
Tensiune
10 → 600V
Battery Type
AA Alkaline
Safety Category
CAT III 600 V, CAT IV 300 V
Tip afisare
LCD
Temperatura maxima de lucru
+55°C
Power Source
Battery
Latime
235mm
Lungime
85mm
Dimensiuni
85 x 235 x 150mm
Tara de origine
United Kingdom
Detalii produs
Megger MFT1721 Multifunction Tester
The MFT1721 is part of the MFT1701 series from Megger whcih tests low voltage electrical installations to BS7671. Providing all the tests required to complete the necessary electrical certification for industrial, commercial, and domestic fixed wiring installations. The unique design allows it to be operated while mounted on the floor, a ladder-shelf, platform, and held or hung around the neck.
The MFT1721 includes full input protection and safety warnings when a hazardous voltage is present. If live voltages exist on a circuit during insulation or continuity testing, the voltage is displayed on the screen. If this voltage exceeds a safe level, further testing is inhibited, and a warning beep sounds.
Supplied with
MFT1721 - Tester, three wire lead set, mains test lead, switched probe, 12-month calibration certificate, warranty upgradeable to 3 years & moulded case