MEAN WELL DR Switch Mode DIN Rail Panel Mount Power Supply, 85 → 264V ac ac Input, 24V dc dc Output, 1.5A
Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
Mean WellSerie
DR
Tip produs
Switch Mode
Faza electrica
1
AC or DC Input Voltage
ac
Numar iesiri
1
Tensiune intrare
85 → 264V ac
AC or DC Output Voltage
dc
Tensiune iesire
24V dc
Curent iesire
1.5A
Dimensiuni
93 x 78 x 56mm
Latime
78mm
Inaltime
93mm
Adancime
56mm
Temperatura minima
-20°C
Timp montare
DIN Rail Mount
Load Regulation
±1%
Caracteristici speciale
Overvoltage and Short Circuit Protection
MTBF
441.5kh
Ripple And Noise
150mV Pk-Pk
Tensiune iesire
21.6 → 26.4V
Maximum Temperature
+60°C
Standarde
RoHS Compliant, TUV EN 60950-1, UL 508
Detalii produs
Mean Well DR Series Step Shaped Single Output DIN Rail PSU
A range of step shaped DIN Rail power supplies from Mean Well. These power supply units are isolation Class II and have no load power consumption <0.5 W (DR-15) and <1 W (DR-100). Wattages are available between 15 W and 100 W.
Standards
UL60950-1, TUV EN60950-1 approved, design refer to EN50178
P.O.A.
1
P.O.A.
Informatii despre stoc temporar indisponibile
1
Informatii despre stoc temporar indisponibile
Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
Mean WellSerie
DR
Tip produs
Switch Mode
Faza electrica
1
AC or DC Input Voltage
ac
Numar iesiri
1
Tensiune intrare
85 → 264V ac
AC or DC Output Voltage
dc
Tensiune iesire
24V dc
Curent iesire
1.5A
Dimensiuni
93 x 78 x 56mm
Latime
78mm
Inaltime
93mm
Adancime
56mm
Temperatura minima
-20°C
Timp montare
DIN Rail Mount
Load Regulation
±1%
Caracteristici speciale
Overvoltage and Short Circuit Protection
MTBF
441.5kh
Ripple And Noise
150mV Pk-Pk
Tensiune iesire
21.6 → 26.4V
Maximum Temperature
+60°C
Standarde
RoHS Compliant, TUV EN 60950-1, UL 508
Detalii produs
Mean Well DR Series Step Shaped Single Output DIN Rail PSU
A range of step shaped DIN Rail power supplies from Mean Well. These power supply units are isolation Class II and have no load power consumption <0.5 W (DR-15) and <1 W (DR-100). Wattages are available between 15 W and 100 W.
Standards
UL60950-1, TUV EN60950-1 approved, design refer to EN50178