Documente tehnice
Specificatii
Marca
MartindaleIndicator Type
Voltage
Battery Type
9V
Audible Tone
Yes
ATEX Approval
No
Power Source
Battery
Safety Category
CAT IV 1000 V
Greutate
120g
Inaltime
25mm
Lungime
202mm
Maximum Detection Voltage
600V ac
Minimum Detection Voltage
180V ac
Temperatura maxima de lucru
+40°C
Latime
36mm
Temperatura minima de lucru
-10°C
Model
TEK 101
Safety Category Level
CAT IV
Safety Category Voltage
1000V
Tara de origine
Philippines
Detalii produs
Martindale Non Contact Voltage Detector MARTEK101
Martindale TEK101 is a simple-to-use non-contact voltage indicator with audible and visual warnings and an extended probe tip for access to confined spaces. It is optimised for identifying energised conductors at voltages within the range 180 V to 600 V AC. Features include a unique built-in 50 Hz proving unit which tests the sensor operation, battery and LED. This unit proves the entire circuit is fully functional, avoiding the need for a separate proving unit. The tip design and optimised sensitivity make it possible to discriminate between adjacent live conductors. The high resolution capability of the TEK101 improves safety and saves time on-site. The pocket sized design conforms to CAT IV 1000 V safety regulations.
Martindale Lock-Off Kits, Voltage Indicators and Proving Units
Informatii indisponibile despre stoc
Incercati din nou mai tarziu
€ 68,43
Buc. (fara TVA)
€ 81,43
Buc. (cu TVA)
1
€ 68,43
Buc. (fara TVA)
€ 81,43
Buc. (cu TVA)
1
Documente tehnice
Specificatii
Marca
MartindaleIndicator Type
Voltage
Battery Type
9V
Audible Tone
Yes
ATEX Approval
No
Power Source
Battery
Safety Category
CAT IV 1000 V
Greutate
120g
Inaltime
25mm
Lungime
202mm
Maximum Detection Voltage
600V ac
Minimum Detection Voltage
180V ac
Temperatura maxima de lucru
+40°C
Latime
36mm
Temperatura minima de lucru
-10°C
Model
TEK 101
Safety Category Level
CAT IV
Safety Category Voltage
1000V
Tara de origine
Philippines
Detalii produs
Martindale Non Contact Voltage Detector MARTEK101
Martindale TEK101 is a simple-to-use non-contact voltage indicator with audible and visual warnings and an extended probe tip for access to confined spaces. It is optimised for identifying energised conductors at voltages within the range 180 V to 600 V AC. Features include a unique built-in 50 Hz proving unit which tests the sensor operation, battery and LED. This unit proves the entire circuit is fully functional, avoiding the need for a separate proving unit. The tip design and optimised sensitivity make it possible to discriminate between adjacent live conductors. The high resolution capability of the TEK101 improves safety and saves time on-site. The pocket sized design conforms to CAT IV 1000 V safety regulations.