Martindale PD240 Proving Unit 2mA 240 V
Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
MartindaleProduct Type
Proving Unit
Tensiune iesire
240 V
Power Source
Battery
Temperatura minima de lucru
-10°C
Temperatura maxima de lucru
40°C
Latime
63 mm
Lungime
144mm
Inaltime
31mm
Greutate
180g
Standards/Approvals
No
Test Current
2mA
Tara de origine
Philippines
Detalii produs
Martindale PD240 Pocket Sized Proving Unit
The Martindale PD240 is a pocket-sized, battery-powered 240 V DC proving unit which is limited to a current of 2 mA. This makes it suitable for use with digital multimeters and many two pole voltage testers that have an input impedance greater than 120 kΩ. The PD240 is actuated by microswitch when the probes of a voltage indicator or test leads of a multimeter are inserted into the probe apertures on its front face. An LED adjacent to the probe apertures indicates when the unit is powered. The body of the proving device is made out of flame retardant ABS. It is flush mounted so is stable when used on flat surfaces.
Supplied with
Battery, belt clip, instruction manual
Standards
BS-EN61010-1 2001
Martindale Lock-Off Kits, Voltage Indicators and Proving Units
Informatii despre stoc temporar indisponibile
€ 104,02
€ 104,02 Buc. (fara TVA)
€ 125,86
€ 125,86 Buc. (cu TVA)
Tip calibrare
Fara calibrare
1
€ 104,02
€ 104,02 Buc. (fara TVA)
€ 125,86
€ 125,86 Buc. (cu TVA)
Informatii despre stoc temporar indisponibile
Tip calibrare
Fara calibrare
1
Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
MartindaleProduct Type
Proving Unit
Tensiune iesire
240 V
Power Source
Battery
Temperatura minima de lucru
-10°C
Temperatura maxima de lucru
40°C
Latime
63 mm
Lungime
144mm
Inaltime
31mm
Greutate
180g
Standards/Approvals
No
Test Current
2mA
Tara de origine
Philippines
Detalii produs
Martindale PD240 Pocket Sized Proving Unit
The Martindale PD240 is a pocket-sized, battery-powered 240 V DC proving unit which is limited to a current of 2 mA. This makes it suitable for use with digital multimeters and many two pole voltage testers that have an input impedance greater than 120 kΩ. The PD240 is actuated by microswitch when the probes of a voltage indicator or test leads of a multimeter are inserted into the probe apertures on its front face. An LED adjacent to the probe apertures indicates when the unit is powered. The body of the proving device is made out of flame retardant ABS. It is flush mounted so is stable when used on flat surfaces.
Supplied with
Battery, belt clip, instruction manual
Standards
BS-EN61010-1 2001