MADE NADIR Cable Tracer, Maximum Safe Working Voltage 250 V ac, 420 V ac
Documente tehnice
Specificatii
Marca
MADETip afisare
LED
Meter Type
Cable Tracer
Battery Life
5 h
Battery Type
NiMH
Power Source
Battery, Mains
Include
Carrying Case, Crocodile Clip x 2, Receiver with Integrated Sensor, Remote Sensor x 2, Rogowski Coil, Transmitter & Connection, UK Mains Lead
Frecventa maxima
50Hz
Maximum Safe Working Voltage
250 V ac, 420 V ac
Minimum Safe Working Voltage
185 V ac, 350 V ac
Model
NADIR
Tip priza
UK
Tara de origine
France
Detalii produs
MADE NADIR LV Cable Tracer
NADIR enables the identification of a live low voltage cable and the ID of each phase under load in a trench and at the substation exit.
Nadir consists of a transmitter and a receiver and is used on a low voltage powered network with or without loads. The transmitter is connected between phases (preferred connection) or between phase and neutral downstream of the measuring point on a low voltage network. Using the receiver, the cable between the transmitter and the medium / low voltage distribution substation can be identified. As can the connection of the feeder in the substation. NADIR also enables identification of the three conductors in the low voltage feeder.
Informatii indisponibile despre stoc
Incercati din nou mai tarziu
P.O.A.
1
P.O.A.
1
Documente tehnice
Specificatii
Marca
MADETip afisare
LED
Meter Type
Cable Tracer
Battery Life
5 h
Battery Type
NiMH
Power Source
Battery, Mains
Include
Carrying Case, Crocodile Clip x 2, Receiver with Integrated Sensor, Remote Sensor x 2, Rogowski Coil, Transmitter & Connection, UK Mains Lead
Frecventa maxima
50Hz
Maximum Safe Working Voltage
250 V ac, 420 V ac
Minimum Safe Working Voltage
185 V ac, 350 V ac
Model
NADIR
Tip priza
UK
Tara de origine
France
Detalii produs
MADE NADIR LV Cable Tracer
NADIR enables the identification of a live low voltage cable and the ID of each phase under load in a trench and at the substation exit.
Nadir consists of a transmitter and a receiver and is used on a low voltage powered network with or without loads. The transmitter is connected between phases (preferred connection) or between phase and neutral downstream of the measuring point on a low voltage network. Using the receiver, the cable between the transmitter and the medium / low voltage distribution substation can be identified. As can the connection of the feeder in the substation. NADIR also enables identification of the three conductors in the low voltage feeder.