Documente tehnice
Specificatii
Marca
LumbergDimensiune celula
Minimodul
Pitch
2.5mm
Numar contacte
8
Number Of Rows
1
Body Orientation
Right Angle
Shrouded/Unshrouded
Shrouded
Connector System
Wire to Board
Montare
Through Hole
Terminal
Solder
Placa contact
Tin
Material de contact
Brass
Curent nominal
5.0A
Tensiune nominala
160.0 V
Detalii produs
Minimodul Horizontal Headers
These Lumberg Minimodul™ horizontal pin headers mate with crimp contact housings (3114 Series), see stock number 737-8482 typical, for indirect mating of wire to board connections.
2.5mm Wire to Board - Lumberg Minimodul Series
These Lumberg Minimodul Connectors are for cable-to-board connections. The Minimodul Series connectors provide easy harnessing of single leads and flat cables with established crimp technology and are especially suitable for low and middle-volume production. The design of the Minimodul Series connectors is suitable for signal and low load currents up to 5 A. Pitch 2.50 mm (.098").
Informatii indisponibile despre stoc
Incercati din nou mai tarziu
€ 0,84
Buc. (Intr-un pachet de 10) (fara TVA)
€ 1,00
Buc. (Intr-un pachet de 10) (cu TVA)
10
€ 0,84
Buc. (Intr-un pachet de 10) (fara TVA)
€ 1,00
Buc. (Intr-un pachet de 10) (cu TVA)
10
Cumpara in pachete mari
Cantitate | Pret unitar | Per Pachet |
---|---|---|
10 - 40 | € 0,84 | € 8,40 |
50+ | € 0,76 | € 7,60 |
Documente tehnice
Specificatii
Marca
LumbergDimensiune celula
Minimodul
Pitch
2.5mm
Numar contacte
8
Number Of Rows
1
Body Orientation
Right Angle
Shrouded/Unshrouded
Shrouded
Connector System
Wire to Board
Montare
Through Hole
Terminal
Solder
Placa contact
Tin
Material de contact
Brass
Curent nominal
5.0A
Tensiune nominala
160.0 V
Detalii produs
Minimodul Horizontal Headers
These Lumberg Minimodul™ horizontal pin headers mate with crimp contact housings (3114 Series), see stock number 737-8482 typical, for indirect mating of wire to board connections.
2.5mm Wire to Board - Lumberg Minimodul Series
These Lumberg Minimodul Connectors are for cable-to-board connections. The Minimodul Series connectors provide easy harnessing of single leads and flat cables with established crimp technology and are especially suitable for low and middle-volume production. The design of the Minimodul Series connectors is suitable for signal and low load currents up to 5 A. Pitch 2.50 mm (.098").