Documente tehnice
Specificatii
Marca
LegrisConnector A
Push In 4 mm
Tip de montaj pneumatic
Tee Threaded Adaptor
Conexiune
Threaded-to-Tube
Threaded Connection
M5 Male
Producator
LF3000
Thread Material
Nickel Plated Brass
Tip material
Glass Reinforced Nylon
Frecventa minima de auto-rezonanta
-20°C
Temperatura maxima de lucru
+80°C
Presiune maxima de operare
20 bar
Tube Connection B - Type
Push In
Connector B
Push In 4 mm
Tara de origine
France
Detalii produs
Stud Branch Tee Adaptor - Male Taper & Parallel Thread
A high-quality polymer push in fitting suitable for compressed air applications. The LF3000 fittings can be used in systems with a working pressure from a vacuum of 0.9 bar to a positive pressure of 20 bar. These fittings are suitable for use with all plastic pneumatic plastic tubing and are 100% leak tested during manufacture.
For the connection of 2 tubes at a 90° angle to a threaded port.
Threaded Tube Adaptors, Elbows and Tees
Informatii indisponibile despre stoc
Incercati din nou mai tarziu
€ 7,55
Buc. (Intr-un pachet de 5) (fara TVA)
€ 8,984
Buc. (Intr-un pachet de 5) (cu TVA)
5
€ 7,55
Buc. (Intr-un pachet de 5) (fara TVA)
€ 8,984
Buc. (Intr-un pachet de 5) (cu TVA)
5
Cumpara in pachete mari
Cantitate | Pret unitar | Per Pachet |
---|---|---|
5 - 20 | € 7,55 | € 37,75 |
25 - 45 | € 7,07 | € 35,35 |
50+ | € 6,79 | € 33,95 |
Documente tehnice
Specificatii
Marca
LegrisConnector A
Push In 4 mm
Tip de montaj pneumatic
Tee Threaded Adaptor
Conexiune
Threaded-to-Tube
Threaded Connection
M5 Male
Producator
LF3000
Thread Material
Nickel Plated Brass
Tip material
Glass Reinforced Nylon
Frecventa minima de auto-rezonanta
-20°C
Temperatura maxima de lucru
+80°C
Presiune maxima de operare
20 bar
Tube Connection B - Type
Push In
Connector B
Push In 4 mm
Tara de origine
France
Detalii produs
Stud Branch Tee Adaptor - Male Taper & Parallel Thread
A high-quality polymer push in fitting suitable for compressed air applications. The LF3000 fittings can be used in systems with a working pressure from a vacuum of 0.9 bar to a positive pressure of 20 bar. These fittings are suitable for use with all plastic pneumatic plastic tubing and are 100% leak tested during manufacture.
For the connection of 2 tubes at a 90° angle to a threaded port.