Documente tehnice
Specificatii
Marca
LegrisConnector A
G 3/8 Female
Connector B
Push In 10 mm
Tip de montaj pneumatic
Bulkhead Threaded-to-Tube Adaptor
Conexiune
Threaded-to-Tube
Threaded Connection
G 3/8 Female
Producator
LF3000
Thread Material
Brass
Tip material
Brass
Temperatura minima de lucru
-20°C
Temperatura maxima de lucru
+80°C
Finisare
Nickel Plated
Presiune maxima de operare
20 bar
Threaded Connection A
G 3/8 Female
Tara de origine
France
Detalii produs
Bulkhead Adaptor - Parallel Thread-to-Tube
A high-quality polymer push in fitting suitable for compressed air applications. The LF3000 fittings can be used in systems with a working pressure from a vacuum of 0.9 bar to a positive pressure of 20 bar. These fittings are suitable for use with all plastic pneumatic plastic tubing and are 100% leak tested during manufacture.
These fitting connect tubing with a male thread through the installation panel and provide an excellent seal between the panel and fitting.
Bulkhead Adaptors and Manifolds
Informatii indisponibile despre stoc
Incercati din nou mai tarziu
€ 13,36
Buc. (Intr-un pachet de 2) (fara TVA)
€ 15,898
Buc. (Intr-un pachet de 2) (cu TVA)
2
€ 13,36
Buc. (Intr-un pachet de 2) (fara TVA)
€ 15,898
Buc. (Intr-un pachet de 2) (cu TVA)
2
Cumpara in pachete mari
Cantitate | Pret unitar | Per Pachet |
---|---|---|
2 - 8 | € 13,36 | € 26,72 |
10 - 18 | € 12,51 | € 25,02 |
20+ | € 12,00 | € 24,00 |
Documente tehnice
Specificatii
Marca
LegrisConnector A
G 3/8 Female
Connector B
Push In 10 mm
Tip de montaj pneumatic
Bulkhead Threaded-to-Tube Adaptor
Conexiune
Threaded-to-Tube
Threaded Connection
G 3/8 Female
Producator
LF3000
Thread Material
Brass
Tip material
Brass
Temperatura minima de lucru
-20°C
Temperatura maxima de lucru
+80°C
Finisare
Nickel Plated
Presiune maxima de operare
20 bar
Threaded Connection A
G 3/8 Female
Tara de origine
France
Detalii produs
Bulkhead Adaptor - Parallel Thread-to-Tube
A high-quality polymer push in fitting suitable for compressed air applications. The LF3000 fittings can be used in systems with a working pressure from a vacuum of 0.9 bar to a positive pressure of 20 bar. These fittings are suitable for use with all plastic pneumatic plastic tubing and are 100% leak tested during manufacture.
These fitting connect tubing with a male thread through the installation panel and provide an excellent seal between the panel and fitting.