Documente tehnice
Specificatii
Marca
LegrisConnector A
G 1/4 Female
Connector B
Push In 4 mm
Tip de montaj pneumatic
Bulkhead Threaded-to-Tube Adaptor
Conexiune
Threaded-to-Tube
Producator
LF3000
Thread Material
Brass
Tip material
Brass
Temperatura minima de lucru
-20°C
Temperatura maxima de lucru
+80°C
Finisare
Nickel Plated
Presiune maxima de operare
20 bar
Threaded Connection
G 1/4 Female
Threaded Connection A
G 1/4 Female
Detalii produs
Bulkhead Adaptor - Parallel Thread-to-Tube
A high-quality polymer push in fitting suitable for compressed air applications. The LF3000 fittings can be used in systems with a working pressure from a vacuum of 0.9 bar to a positive pressure of 20 bar. These fittings are suitable for use with all plastic pneumatic plastic tubing and are 100% leak tested during manufacture.
These fitting connect tubing with a male thread through the installation panel and provide an excellent seal between the panel and fitting.
Bulkhead Adaptors and Manifolds
Informatii indisponibile despre stoc
Incercati din nou mai tarziu
€ 9,34
Buc. (Intr-un pachet de 5) (fara TVA)
€ 11,115
Buc. (Intr-un pachet de 5) (cu TVA)
5
€ 9,34
Buc. (Intr-un pachet de 5) (fara TVA)
€ 11,115
Buc. (Intr-un pachet de 5) (cu TVA)
5
Cumpara in pachete mari
Cantitate | Pret unitar | Per Pachet |
---|---|---|
5 - 20 | € 9,34 | € 46,70 |
25 - 45 | € 8,72 | € 43,60 |
50+ | € 8,35 | € 41,75 |
Documente tehnice
Specificatii
Marca
LegrisConnector A
G 1/4 Female
Connector B
Push In 4 mm
Tip de montaj pneumatic
Bulkhead Threaded-to-Tube Adaptor
Conexiune
Threaded-to-Tube
Producator
LF3000
Thread Material
Brass
Tip material
Brass
Temperatura minima de lucru
-20°C
Temperatura maxima de lucru
+80°C
Finisare
Nickel Plated
Presiune maxima de operare
20 bar
Threaded Connection
G 1/4 Female
Threaded Connection A
G 1/4 Female
Detalii produs
Bulkhead Adaptor - Parallel Thread-to-Tube
A high-quality polymer push in fitting suitable for compressed air applications. The LF3000 fittings can be used in systems with a working pressure from a vacuum of 0.9 bar to a positive pressure of 20 bar. These fittings are suitable for use with all plastic pneumatic plastic tubing and are 100% leak tested during manufacture.
These fitting connect tubing with a male thread through the installation panel and provide an excellent seal between the panel and fitting.