Documente tehnice
Specificatii
Marca
LegrisConnector A
R 1/2 Male
Connector B
Push In 16 mm
Tip de montaj pneumatic
Elbow Threaded Adaptor
Conexiune
Threaded-to-Tube
Threaded Connection
R 1/2 Male
Producator
LF3000
Thread Material
Nickel Plated Brass
Angle
90°
Presiune maxima de operare
20 bar
Swivel Connection
Yes
Tip material
Plastic
Frecventa minima de auto-rezonanta
-20°C
Temperatura maxima de lucru
+80°C
Timp montare
Inline
Standarde
EC/42/2006
Tara de origine
France
Detalii produs
Stud Elbow Adaptor - Male Thread
A high-quality polymer push in fitting suitable for compressed air applications. The LF3000 fittings can be used in systems with a working pressure from a vacuum of 0.9 bar to a positive pressure of 20 bar. These fittings are suitable for use with all plastic pneumatic plastic tubing and are 100% leak tested during manufacture.
3109 fittings are for the connection of tubing at 90° with a male thread. They can be tightened using a flat spanner or an Allen key if the installation is short on space.
Threaded Tube Adaptors, Elbows and Tees
Informatii indisponibile despre stoc
Incercati din nou mai tarziu
€ 20,72
Buc. (Intr-un pachet de 5) (fara TVA)
€ 24,657
Buc. (Intr-un pachet de 5) (cu TVA)
5
€ 20,72
Buc. (Intr-un pachet de 5) (fara TVA)
€ 24,657
Buc. (Intr-un pachet de 5) (cu TVA)
5
Documente tehnice
Specificatii
Marca
LegrisConnector A
R 1/2 Male
Connector B
Push In 16 mm
Tip de montaj pneumatic
Elbow Threaded Adaptor
Conexiune
Threaded-to-Tube
Threaded Connection
R 1/2 Male
Producator
LF3000
Thread Material
Nickel Plated Brass
Angle
90°
Presiune maxima de operare
20 bar
Swivel Connection
Yes
Tip material
Plastic
Frecventa minima de auto-rezonanta
-20°C
Temperatura maxima de lucru
+80°C
Timp montare
Inline
Standarde
EC/42/2006
Tara de origine
France
Detalii produs
Stud Elbow Adaptor - Male Thread
A high-quality polymer push in fitting suitable for compressed air applications. The LF3000 fittings can be used in systems with a working pressure from a vacuum of 0.9 bar to a positive pressure of 20 bar. These fittings are suitable for use with all plastic pneumatic plastic tubing and are 100% leak tested during manufacture.
3109 fittings are for the connection of tubing at 90° with a male thread. They can be tightened using a flat spanner or an Allen key if the installation is short on space.