Key Instruments MR3000 Series Variable Area Flow Meter for Gas, 1L/min Min, 10 L/min Max
Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
Key InstrumentsProduct Type
Flow Meter
Media Monitored
Gas
Tip dispozitiv
Variable Area
Minimum Flow Rate
1L/min
Housing Material
Polycarbonate
Debit maxim
10L/min
Tip conexiune
1/8 in NPT Female
Presiune maxima
6.9bar
Maximum Media Temperature
65°C
Temperatura minima de lucru
65°C
Temperatura maxima de lucru
65°C
Standards/Approvals
No
Series
MR3000
Tara de origine
United States
Detalii produs
Low Cost Polycarbonate Flow Meters
MR3000 molded flow meters supplied with scales in LPM and SCFH for air, or CCM and GPH for water.
Manufactured from high-impact polycarbonate, the MR3000 series can operate at pressures of 100 psig and temperatures of 150°F (65°C).
These economically designed units provide high quality and accuracy when properly installed. The durability of the polycarbonate allows the flow meter to provide years of trouble-free service.
Supplied with
mounting brackets & built-in bezel
Informatii despre stoc temporar indisponibile
€ 124,23
€ 124,23 Buc. (fara TVA)
€ 150,32
€ 150,32 Buc. (cu TVA)
1
€ 124,23
€ 124,23 Buc. (fara TVA)
€ 150,32
€ 150,32 Buc. (cu TVA)
Informatii despre stoc temporar indisponibile
1
Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
Key InstrumentsProduct Type
Flow Meter
Media Monitored
Gas
Tip dispozitiv
Variable Area
Minimum Flow Rate
1L/min
Housing Material
Polycarbonate
Debit maxim
10L/min
Tip conexiune
1/8 in NPT Female
Presiune maxima
6.9bar
Maximum Media Temperature
65°C
Temperatura minima de lucru
65°C
Temperatura maxima de lucru
65°C
Standards/Approvals
No
Series
MR3000
Tara de origine
United States
Detalii produs
Low Cost Polycarbonate Flow Meters
MR3000 molded flow meters supplied with scales in LPM and SCFH for air, or CCM and GPH for water.
Manufactured from high-impact polycarbonate, the MR3000 series can operate at pressures of 100 psig and temperatures of 150°F (65°C).
These economically designed units provide high quality and accuracy when properly installed. The durability of the polycarbonate allows the flow meter to provide years of trouble-free service.
Supplied with
mounting brackets & built-in bezel