Documente tehnice
Specificatii
Marca
JSTDimensiune celula
XA
Pitch
2.5mm
Numar contacte
2
Number Of Rows
1
Body Orientation
Right Angle
Shrouded/Unshrouded
Shrouded
Connector System
Wire to Board
Montare
Through Hole
Terminal
Solder
Placa contact
Tin
Material de contact
Copper Alloy
Curent nominal
3.0A
Tensiune nominala
250.0 V
Tara de origine
Japan
Detalii produs
XA series 90° Shrouded Headers
A range of XA series 2.5mm pitch 90° wire-to-board shrouded PCB header connectors from JST. These side-entry headers have a locking ramp device that provides a secure connection to the mating connector and also helps to prevent disconnection due to vibration or during the assembly process. Insertion guides and polarization bosses are also incorporated into the housing design of these XA series PCB headers to facilitate easy insertion and accurate alignment on the PCB. The connector housings are made from glass filled PA66 nylon which is effective against solder cracking problems.
2.5mm Wire-to-Board Connector, JST XA Series
Please note- the colour of the picture displayed above is for reference only.
Informatii indisponibile despre stoc
Incercati din nou mai tarziu
€ 0,42
Buc. (Intr-un pachet de 10) (fara TVA)
€ 0,50
Buc. (Intr-un pachet de 10) (cu TVA)
10
€ 0,42
Buc. (Intr-un pachet de 10) (fara TVA)
€ 0,50
Buc. (Intr-un pachet de 10) (cu TVA)
10
Cumpara in pachete mari
Cantitate | Pret unitar | Per Pachet |
---|---|---|
10 - 240 | € 0,42 | € 4,20 |
250 - 990 | € 0,30 | € 3,00 |
1000 - 4990 | € 0,21 | € 2,10 |
5000 - 9990 | € 0,19 | € 1,90 |
10000+ | € 0,17 | € 1,70 |
Documente tehnice
Specificatii
Marca
JSTDimensiune celula
XA
Pitch
2.5mm
Numar contacte
2
Number Of Rows
1
Body Orientation
Right Angle
Shrouded/Unshrouded
Shrouded
Connector System
Wire to Board
Montare
Through Hole
Terminal
Solder
Placa contact
Tin
Material de contact
Copper Alloy
Curent nominal
3.0A
Tensiune nominala
250.0 V
Tara de origine
Japan
Detalii produs
XA series 90° Shrouded Headers
A range of XA series 2.5mm pitch 90° wire-to-board shrouded PCB header connectors from JST. These side-entry headers have a locking ramp device that provides a secure connection to the mating connector and also helps to prevent disconnection due to vibration or during the assembly process. Insertion guides and polarization bosses are also incorporated into the housing design of these XA series PCB headers to facilitate easy insertion and accurate alignment on the PCB. The connector housings are made from glass filled PA66 nylon which is effective against solder cracking problems.
2.5mm Wire-to-Board Connector, JST XA Series
Please note- the colour of the picture displayed above is for reference only.