JAE, MX23A Automotive Connector Plug Black Through Hole 40 Way, Solder Termination MX23A40NF1
Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
JAETip produs
Header
Numar contacte
40
Subtip
Male
Number Of Rows
2
Curent nominal
3A
Montare
Through Hole
Serie
MX23A
Culoare
Black
Terminal
Solder
Inaltime
16.4mm
Latime
65.5mm
Adancime
33.3mm
Housing Material
Glass Fibre Reinforced PBT
Frecventa minima de auto-rezonanta
-40°C
Temperatura maxima de lucru
+125°C
Placa contact
Tin
Material de contact
Copper Alloy
Detalii produs
JAE MX23A 2.5 mm Waterproof PCB Header Connectors
MX23A 2.5 mm PCB header connectors for use in wire to board applications that require waterproof protection. These MX23A waterproof PCB headers have a low profile design with a board mounting height of just 18.3 mm. A silicon rubber sealing ring in the mating area offers water protection when mated with the MX23A waterproof socket. These MX23A PCB header connectors also feature mounting bosses for accurate positioning on PCB.
JAE MX23A Range
JAE MX23A Waterproof Connectors can be used for wide range sealed equipment in the automotive industry including automobiles, motorcycles and so on. The JAE MX23A Waterproof Connector is sealed by having a Sealing Ring in the mating area and by a Grommet in the wire crimping area for full protection against the ingress of water.
JAE MX23A Waterproof Connectors are a low profiled type with a board mounting height of 18.3 mm and a socket connector height of 22.2 mm maximum.
JAE MX23A Waterproof Connectors have a double fin structured socket contact for high reliability. The socket contact also has a large chamfer on the front-edge to prevent damage to the grommet.
JAE MX23A Waterproof Connectors ensure complete insertion of the socket contact into its housing due to any incomplete insertions being easily detected during the front cap mounting process.
€ 19,30
€ 19,30 Buc. (fara TVA)
€ 23,35
€ 23,35 Buc. (cu TVA)
Standard
1
€ 19,30
€ 19,30 Buc. (fara TVA)
€ 23,35
€ 23,35 Buc. (cu TVA)
Informatii despre stoc temporar indisponibile
Standard
1
Informatii despre stoc temporar indisponibile
| Cantitate | Pret unitar |
|---|---|
| 1 - 9 | € 19,30 |
| 10 - 24 | € 17,40 |
| 25+ | € 15,52 |
Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
JAETip produs
Header
Numar contacte
40
Subtip
Male
Number Of Rows
2
Curent nominal
3A
Montare
Through Hole
Serie
MX23A
Culoare
Black
Terminal
Solder
Inaltime
16.4mm
Latime
65.5mm
Adancime
33.3mm
Housing Material
Glass Fibre Reinforced PBT
Frecventa minima de auto-rezonanta
-40°C
Temperatura maxima de lucru
+125°C
Placa contact
Tin
Material de contact
Copper Alloy
Detalii produs
JAE MX23A 2.5 mm Waterproof PCB Header Connectors
MX23A 2.5 mm PCB header connectors for use in wire to board applications that require waterproof protection. These MX23A waterproof PCB headers have a low profile design with a board mounting height of just 18.3 mm. A silicon rubber sealing ring in the mating area offers water protection when mated with the MX23A waterproof socket. These MX23A PCB header connectors also feature mounting bosses for accurate positioning on PCB.
JAE MX23A Range
JAE MX23A Waterproof Connectors can be used for wide range sealed equipment in the automotive industry including automobiles, motorcycles and so on. The JAE MX23A Waterproof Connector is sealed by having a Sealing Ring in the mating area and by a Grommet in the wire crimping area for full protection against the ingress of water.
JAE MX23A Waterproof Connectors are a low profiled type with a board mounting height of 18.3 mm and a socket connector height of 22.2 mm maximum.
JAE MX23A Waterproof Connectors have a double fin structured socket contact for high reliability. The socket contact also has a large chamfer on the front-edge to prevent damage to the grommet.
JAE MX23A Waterproof Connectors ensure complete insertion of the socket contact into its housing due to any incomplete insertions being easily detected during the front cap mounting process.