ITT Cannon, TNASize 14 Straight Circular Connector Backshell With Strain Relief, For Use With Neptune Circular
Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
ITT CannonUtilizare cu
Neptune Circular Connector, TNM Circular Connector
Shell Size
14
Body Orientation
Straight
Housing Material
Polymer
Lungime
67.1 mm, 80.5 mm
Strain Relief
Yes
Serie
TNA
Tara de origine
Hungary
Detalii produs
Backshell Accessories
Backshells providing additional protection. Sealed version has integral sealing gland and clamping mechanism. Unsealed version has strain relief clamp.
Neptune
Based on Trident Ringlok series, the Neptune range combines power and signal contacts. Widely used in automotive, marine and process control industries, they feature a strong bayonet coupling system with standard and reversed pin/socket combinations. A wide selection of backshell accessories, rear housings and dust caps are available.,To maintain IP67 rating the rear of the connectors have a rubber seal which is pierced upon contact insertion. The seal is held in place by a screw ring (as supplied) which may be replaced with the appropriate size backshell. For IP67 rating to be maintained, wire insulation diameters should be within the following diameters: Signal wires: 1.7 to 2.7mm, Power wires : 2.7 to 4.0mm.,Number of contacts shown as power/signal eg 2//13.
€ 7,46
€ 7,46 Buc. (fara TVA)
€ 9,03
€ 9,03 Buc. (cu TVA)
1
€ 7,46
€ 7,46 Buc. (fara TVA)
€ 9,03
€ 9,03 Buc. (cu TVA)
Informatii despre stoc temporar indisponibile
1
Informatii despre stoc temporar indisponibile
| Cantitate | Pret unitar |
|---|---|
| 1 - 19 | € 7,46 |
| 20 - 39 | € 6,65 |
| 40+ | € 5,94 |
Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
ITT CannonUtilizare cu
Neptune Circular Connector, TNM Circular Connector
Shell Size
14
Body Orientation
Straight
Housing Material
Polymer
Lungime
67.1 mm, 80.5 mm
Strain Relief
Yes
Serie
TNA
Tara de origine
Hungary
Detalii produs
Backshell Accessories
Backshells providing additional protection. Sealed version has integral sealing gland and clamping mechanism. Unsealed version has strain relief clamp.
Neptune
Based on Trident Ringlok series, the Neptune range combines power and signal contacts. Widely used in automotive, marine and process control industries, they feature a strong bayonet coupling system with standard and reversed pin/socket combinations. A wide selection of backshell accessories, rear housings and dust caps are available.,To maintain IP67 rating the rear of the connectors have a rubber seal which is pierced upon contact insertion. The seal is held in place by a screw ring (as supplied) which may be replaced with the appropriate size backshell. For IP67 rating to be maintained, wire insulation diameters should be within the following diameters: Signal wires: 1.7 to 2.7mm, Power wires : 2.7 to 4.0mm.,Number of contacts shown as power/signal eg 2//13.