Documente tehnice
Specificatii
Marca
InfineonPeak Average Forward Current
35A
Bridge Type
Three Phase
Peak Reverse Repetitive Voltage
1600V
Timp montare
Panel Mount
Tip pachet
AG-ECONO2-7
Configuration
Single
Peak Non-Repetitive Forward Surge Current
650A
Temperatura maxima de lucru
+150 °C
Frecventa minima de auto-rezonanta
-40 °C
Peak Forward Voltage
2.4V
Curentul de varf invers
5mA
Lungime
107.5mm
Dimensiuni
107.5 x 45 x 17mm
Junction Capacitance
5.1nF
Inaltime
17mm
Latime
45mm
Detalii produs
3-Phase Bridge Rectifier Module, DDB6U Series, Infineon
The Infineon Three Phase Bridge Rectifiers Eupec™ EconoBRIDGE™ and EasyBRIDGE have a solder pin assembly and the eupec™ IsoPACK™ series has screw load terminals. The rectifier module range supports Diode Bridges and bridges with Brake Chopper as well as brake chopper and NTC resistor versions. This compact converter will cover 25A to 205A at 1600 volts.
Bridge Rectifiers - Infineon
A Bridge Rectifier is a diode common application, known for converting an Alternating Current (AC) input into Direct Current a (DC) output. A diode bridge is an arrangement of four diodes in a bridge circuit configuration that provides the same polarity of output for either polarity of input.
Informatii indisponibile despre stoc
Incercati din nou mai tarziu
€ 92,51
Buc. (fara TVA)
€ 110,09
Buc. (cu TVA)
1
€ 92,51
Buc. (fara TVA)
€ 110,09
Buc. (cu TVA)
1
Cumpara in pachete mari
Cantitate | Pret unitar |
---|---|
1 - 1 | € 92,51 |
2 - 4 | € 86,41 |
5+ | € 82,94 |
Documente tehnice
Specificatii
Marca
InfineonPeak Average Forward Current
35A
Bridge Type
Three Phase
Peak Reverse Repetitive Voltage
1600V
Timp montare
Panel Mount
Tip pachet
AG-ECONO2-7
Configuration
Single
Peak Non-Repetitive Forward Surge Current
650A
Temperatura maxima de lucru
+150 °C
Frecventa minima de auto-rezonanta
-40 °C
Peak Forward Voltage
2.4V
Curentul de varf invers
5mA
Lungime
107.5mm
Dimensiuni
107.5 x 45 x 17mm
Junction Capacitance
5.1nF
Inaltime
17mm
Latime
45mm
Detalii produs
3-Phase Bridge Rectifier Module, DDB6U Series, Infineon
The Infineon Three Phase Bridge Rectifiers Eupec™ EconoBRIDGE™ and EasyBRIDGE have a solder pin assembly and the eupec™ IsoPACK™ series has screw load terminals. The rectifier module range supports Diode Bridges and bridges with Brake Chopper as well as brake chopper and NTC resistor versions. This compact converter will cover 25A to 205A at 1600 volts.
Bridge Rectifiers - Infineon
A Bridge Rectifier is a diode common application, known for converting an Alternating Current (AC) input into Direct Current a (DC) output. A diode bridge is an arrangement of four diodes in a bridge circuit configuration that provides the same polarity of output for either polarity of input.