Stud Cam Follower KR19PPA, 8mm ID, 19mm OD
Documente tehnice
Specificatii
Marca
INADiametru rola
19mm
Lungime rola
11mm
Tip produs
Stud
Dimensiune alezaj
8mm
Evaluare statica de sarcina
4000N
Evaluare dinamica de sarcina
3500N
Material
Steel
Tara de origine
Slovakia
Detalii produs
Stud Type Track Rollers
INA from Schaeffler stud type track rollers are similar in their construction to single and double row yoke type track rollers. The raceway is formed by a heavy-section roller stud with a fixing thread and lubrication hole.
Due to the thick-walled outer ring with profiled outside surface and the rolling element set, they can support high radial loads as well as axial loads arising from slight misalignment and skewed running.
Stud type track rollers with a crowned outside surface are predominantly used since they are often inclined in relation to the mating track and edge stresses must be avoided.
INA
Informatii indisponibile despre stoc
Incercati din nou mai tarziu
€ 60,33
Buc. (fara TVA)
€ 71,79
Buc. (cu TVA)
1
€ 60,33
Buc. (fara TVA)
€ 71,79
Buc. (cu TVA)
1
Cumpara in pachete mari
| Cantitate | Pret unitar |
|---|---|
| 1 - 4 | € 60,33 |
| 5 - 9 | € 55,96 |
| 10 - 24 | € 54,36 |
| 25+ | € 52,75 |
Documente tehnice
Specificatii
Marca
INADiametru rola
19mm
Lungime rola
11mm
Tip produs
Stud
Dimensiune alezaj
8mm
Evaluare statica de sarcina
4000N
Evaluare dinamica de sarcina
3500N
Material
Steel
Tara de origine
Slovakia
Detalii produs
Stud Type Track Rollers
INA from Schaeffler stud type track rollers are similar in their construction to single and double row yoke type track rollers. The raceway is formed by a heavy-section roller stud with a fixing thread and lubrication hole.
Due to the thick-walled outer ring with profiled outside surface and the rolling element set, they can support high radial loads as well as axial loads arising from slight misalignment and skewed running.
Stud type track rollers with a crowned outside surface are predominantly used since they are often inclined in relation to the mating track and edge stresses must be avoided.