Igus RJUM-03-12, Bearing with 21.8mm Outside Diameter
Documente tehnice
Specificatii
Marca
IgusDiametru interior
12mm
Outside Diameter
21.8mm
Lungime
31.9mm
Linear Bearing Type
Linear Plain Bearing
Evaluare sarcina statica
6720N
Evaluare dinamica de sarcina
960N
Tara de origine
Germany
Detalii produs
Self Compensating Bushing - Closed
Self Compensating,Uses a spherical area on the outer casing for self adjustment. Reductions in the load bearing capacity due to the self-adjusting function are thus avoided, because the shaft is always supported on the entire projected surface. Replacement liners are simply pushed into the aluminium housings.
Self-Lubricating Bushes - Drylin™
Drylin™ bearings are manufactured from high performance polymers. They run without lubrication and require no maintenance. They consist of a polymer liner located in an aluminium housing. Both standard and self-compensating styles are available in closed and split configurations. Features include very low friction, suitability for high speed and acceleration use, high load bearing capacity and self-wiping design. The bearings run on aluminium, steel and ceramic shafts.
Informatii indisponibile despre stoc
Incercati din nou mai tarziu
€ 19,82
Buc. (fara TVA)
€ 23,59
Buc. (cu TVA)
1
€ 19,82
Buc. (fara TVA)
€ 23,59
Buc. (cu TVA)
1
Cumpara in pachete mari
| Cantitate | Pret unitar |
|---|---|
| 1 - 4 | € 19,82 |
| 5 - 9 | € 18,32 |
| 10+ | € 17,77 |
Documente tehnice
Specificatii
Marca
IgusDiametru interior
12mm
Outside Diameter
21.8mm
Lungime
31.9mm
Linear Bearing Type
Linear Plain Bearing
Evaluare sarcina statica
6720N
Evaluare dinamica de sarcina
960N
Tara de origine
Germany
Detalii produs
Self Compensating Bushing - Closed
Self Compensating,Uses a spherical area on the outer casing for self adjustment. Reductions in the load bearing capacity due to the self-adjusting function are thus avoided, because the shaft is always supported on the entire projected surface. Replacement liners are simply pushed into the aluminium housings.
Self-Lubricating Bushes - Drylin™
Drylin™ bearings are manufactured from high performance polymers. They run without lubrication and require no maintenance. They consist of a polymer liner located in an aluminium housing. Both standard and self-compensating styles are available in closed and split configurations. Features include very low friction, suitability for high speed and acceleration use, high load bearing capacity and self-wiping design. The bearings run on aluminium, steel and ceramic shafts.