ifm electronic Through Beam Photoelectric Sensor, Fork Sensor, >0.3 mm Detection Range
Documente tehnice
Specificatii
Marca
ifm electronicSensor Style
Fork
Detection Type
Through Beam
Detection Range
>0.3 mm
Tip iesire
NPN/PNP
Conexiune electrica
M8 3 Pin Connector
Maximum dc Voltage
35V
Tip terminal
Quick Disconnect
Light Source
LED
Protectie IP
IP67
Maximum Current
40 mA
Temperatura maxima de lucru
+60°C
Housing Material
Die Cast Zinc
Frecventa minima de auto-rezonanta
-25°C
Standarde
CE, cULus
Tara de origine
Germany
Detalii produs
ifm OPU Optical Fork Sensors
ifm OPU series optical fork sensors with a robust metal housing offer quick setup with no need to align a transmitter and receiver. These optical sensors are used in particular for part monitoring in feeder and handling systems. Further application examples are belt edge or double feed monitoring with the exact sensitivity setting via potentiometer being helpful. The fine light beam with its constant small diameter is also ideal for monitoring shaft imbalance.
Informatii indisponibile despre stoc
Incercati din nou mai tarziu
€ 220,51
Buc. (fara TVA)
€ 262,41
Buc. (cu TVA)
1
€ 220,51
Buc. (fara TVA)
€ 262,41
Buc. (cu TVA)
1
Documente tehnice
Specificatii
Marca
ifm electronicSensor Style
Fork
Detection Type
Through Beam
Detection Range
>0.3 mm
Tip iesire
NPN/PNP
Conexiune electrica
M8 3 Pin Connector
Maximum dc Voltage
35V
Tip terminal
Quick Disconnect
Light Source
LED
Protectie IP
IP67
Maximum Current
40 mA
Temperatura maxima de lucru
+60°C
Housing Material
Die Cast Zinc
Frecventa minima de auto-rezonanta
-25°C
Standarde
CE, cULus
Tara de origine
Germany
Detalii produs
ifm OPU Optical Fork Sensors
ifm OPU series optical fork sensors with a robust metal housing offer quick setup with no need to align a transmitter and receiver. These optical sensors are used in particular for part monitoring in feeder and handling systems. Further application examples are belt edge or double feed monitoring with the exact sensitivity setting via potentiometer being helpful. The fine light beam with its constant small diameter is also ideal for monitoring shaft imbalance.