Hirschmann Test & Measurement Black Female Banana Socket, 4 mm Connector, Solder Termination, 24A, 1000V ac/dc, Gold
Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Culoare
Black
Subtip
Female
Terminal
Solder
Tensiune nominala
1000V ac/dc
Curent nominal
24A
Connector Size
4 mm
Placa contact
Gold
Lungime
36mm
Tip produs
Banana Socket
Material de contact
Brass
Insulation Material
PA
Tara de origine
Germany
Detalii produs
SEB 2630 S1.9, Hirschmann CAT II 4mm Safety Series, Contact Protected Socket with Solder Pin
SEB 2630 S1.9, Hirschmann CAT II 4mm safety series, 4mm diameter built-in socket that is contact-protected, with a 1.9 mm soldering spike of gold-plated brass construction. These safety connectors are ideal for installation into switchpanels and equipment chassis with wall thicknesses up to 6 mm. The soldering spike can be soldered into printed boards if desired.
€ 15,15
€ 3,03 Buc. (Intr-un pachet de 5) (fara TVA)
€ 18,33
€ 3,666 Buc. (Intr-un pachet de 5) (cu TVA)
5
€ 15,15
€ 3,03 Buc. (Intr-un pachet de 5) (fara TVA)
€ 18,33
€ 3,666 Buc. (Intr-un pachet de 5) (cu TVA)
Informatii despre stoc temporar indisponibile
5
Informatii despre stoc temporar indisponibile
| Cantitate | Pret unitar | Per Pachet |
|---|---|---|
| 5 - 45 | € 3,03 | € 15,15 |
| 50 - 120 | € 2,78 | € 13,90 |
| 125 - 245 | € 2,53 | € 12,65 |
| 250+ | € 2,28 | € 11,40 |
Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Culoare
Black
Subtip
Female
Terminal
Solder
Tensiune nominala
1000V ac/dc
Curent nominal
24A
Connector Size
4 mm
Placa contact
Gold
Lungime
36mm
Tip produs
Banana Socket
Material de contact
Brass
Insulation Material
PA
Tara de origine
Germany
Detalii produs
SEB 2630 S1.9, Hirschmann CAT II 4mm Safety Series, Contact Protected Socket with Solder Pin
SEB 2630 S1.9, Hirschmann CAT II 4mm safety series, 4mm diameter built-in socket that is contact-protected, with a 1.9 mm soldering spike of gold-plated brass construction. These safety connectors are ideal for installation into switchpanels and equipment chassis with wall thicknesses up to 6 mm. The soldering spike can be soldered into printed boards if desired.