Hirschmann Test & Measurement Silver Male Banana Plug, 2mm Connector, Solder Termination, 6A, 30 V ac, 60V dc, Nickel
Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Culoare
Silver
Subtip
Male
Terminal
Solder
Tensiune nominala
30 V ac, 60V dc
Curent nominal
6A
Connector Size
2mm
Placa contact
Nickel
Lungime
14mm
Tip produs
Banana Plug
Material de contact
Brass
Tara de origine
Germany
Detalii produs
MST 201, Hirschmann Test and Measurement CAT I, 6A, 2mm Miniature Connector Pin
From Hirschmann Test and Measurement, this CAT I 2 mm diameter unsprung miniature connector pin is for soldering into printed boards. The MST 201 type connector pin connects with MKU 1 and MBU 2 series of connectors. This 2mm connector pin is used together with the MBU 2 series socket in stacking printed boards together. These Connector pins are installed at a spacing pitch of 5mm and up.
2mm Hirschmann Test Connectors
€ 7,80
€ 0,78 Buc. (Intr-un pachet de 10) (fara TVA)
€ 9,44
€ 0,944 Buc. (Intr-un pachet de 10) (cu TVA)
10
€ 7,80
€ 0,78 Buc. (Intr-un pachet de 10) (fara TVA)
€ 9,44
€ 0,944 Buc. (Intr-un pachet de 10) (cu TVA)
Informatii despre stoc temporar indisponibile
10
Informatii despre stoc temporar indisponibile
Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Culoare
Silver
Subtip
Male
Terminal
Solder
Tensiune nominala
30 V ac, 60V dc
Curent nominal
6A
Connector Size
2mm
Placa contact
Nickel
Lungime
14mm
Tip produs
Banana Plug
Material de contact
Brass
Tara de origine
Germany
Detalii produs
MST 201, Hirschmann Test and Measurement CAT I, 6A, 2mm Miniature Connector Pin
From Hirschmann Test and Measurement, this CAT I 2 mm diameter unsprung miniature connector pin is for soldering into printed boards. The MST 201 type connector pin connects with MKU 1 and MBU 2 series of connectors. This 2mm connector pin is used together with the MBU 2 series socket in stacking printed boards together. These Connector pins are installed at a spacing pitch of 5mm and up.