HellermannTyton WIC3 Snap On Cable Markers, Violet, Pre-printed ""7"", 4.3 → 5.3mm Cable
Documente tehnice
Specificatii
Marca
HellermannTytonAffixing Method
Snap On
Legend
7
Minimum Cable Diameter
4.3mm
Maximum Cable Diameter
5.3mm
Culoare
Violet
Lungime
3mm
Latime
8 mm
Cantitate
100
Printable
No
Material
Polyamide
Temperatura minima de lucru
-40°C
Temperatura maxima de lucru
+85°C
Resistant To
Vibrations
Dimensiune celula
WIC3
Diametru cablu
4.3 → 5.3mm
Temperatura de lucru
-40 → +85 °C
Detalii produs
WIC Snap-on Cable Markers
WIC markers are applied to the wire by simply clicking them on using the WIC tool or if no tool is available they can easily be applied by hand. Simply insert the marker strip into the back of the tool and slide down to the end and simply press the marker down over the wire. Twist off the marker and apply the next marker. Once all the markers are on slide them together until the locking mechanism engages. The markers are on a dispenser that is colour coded (Red, Blue or Yellow) for the different sizes of markers. The applicator tool (which can be used with all 3 sizes of markers) is easy to use and designed for use in confined space.
Informatii indisponibile despre stoc
Incercati din nou mai tarziu
€ 11,11
1 Bag of 100 (fara TVA)
€ 13,22
1 Bag of 100 (cu TVA)
1
€ 11,11
1 Bag of 100 (fara TVA)
€ 13,22
1 Bag of 100 (cu TVA)
1
Cumpara in pachete mari
| Cantitate | Pret unitar |
|---|---|
| 1 - 14 | € 11,11 |
| 15 - 49 | € 10,25 |
| 50+ | € 9,59 |
Documente tehnice
Specificatii
Marca
HellermannTytonAffixing Method
Snap On
Legend
7
Minimum Cable Diameter
4.3mm
Maximum Cable Diameter
5.3mm
Culoare
Violet
Lungime
3mm
Latime
8 mm
Cantitate
100
Printable
No
Material
Polyamide
Temperatura minima de lucru
-40°C
Temperatura maxima de lucru
+85°C
Resistant To
Vibrations
Dimensiune celula
WIC3
Diametru cablu
4.3 → 5.3mm
Temperatura de lucru
-40 → +85 °C
Detalii produs
WIC Snap-on Cable Markers
WIC markers are applied to the wire by simply clicking them on using the WIC tool or if no tool is available they can easily be applied by hand. Simply insert the marker strip into the back of the tool and slide down to the end and simply press the marker down over the wire. Twist off the marker and apply the next marker. Once all the markers are on slide them together until the locking mechanism engages. The markers are on a dispenser that is colour coded (Red, Blue or Yellow) for the different sizes of markers. The applicator tool (which can be used with all 3 sizes of markers) is easy to use and designed for use in confined space.