HARTING, D-Sub Standard Series, Female Crimp D-sub Connector Contact, PdNi Pin, 24 → 20 AWG
Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
HartingSubtip
Female
Material de contact
Brass
Dimensiune fir
24 → 20 AWG
Terminal
Crimp
Placa contact
PdNi
Contact Type
Pin
Maximum Contact Resistance
≤10MΩ
Minimum Wire Size mm²
0.25mm²
Maximum Wire Size mm²
0.56mm²
Serie
D-Sub Standard
Curent nominal
6.5A
Lungime
14.1mm
Maximum Wire Size AWG
20AWG
Minimum Wire Size AWG
24AWG
Tara de origine
Germany
Detalii produs
Harting Sub-D Connector Crimp Contacts and Tooling
From Harting, a range of Male and female contacts for crimping onto wires with cross sections between 28 - 20 AWG, suitable for Harting D-Sub connectors. The range also includes an appropriate crimp tool for use with male and female cut and formed contacts, and an insertion removal tool.
Standards
IEC 60 807
€ 110,00
€ 0,22 Buc. (Pe o rola de 500) (fara TVA)
€ 133,10
€ 0,266 Buc. (Pe o rola de 500) (cu TVA)
500
€ 110,00
€ 0,22 Buc. (Pe o rola de 500) (fara TVA)
€ 133,10
€ 0,266 Buc. (Pe o rola de 500) (cu TVA)
Informatii despre stoc temporar indisponibile
500
Informatii despre stoc temporar indisponibile
| Cantitate | Pret unitar | Per Rola |
|---|---|---|
| 500 - 1000 | € 0,22 | € 110,00 |
| 1500 - 2500 | € 0,21 | € 105,00 |
| 3000 - 4500 | € 0,20 | € 100,00 |
| 5000+ | € 0,20 | € 100,00 |
Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
HartingSubtip
Female
Material de contact
Brass
Dimensiune fir
24 → 20 AWG
Terminal
Crimp
Placa contact
PdNi
Contact Type
Pin
Maximum Contact Resistance
≤10MΩ
Minimum Wire Size mm²
0.25mm²
Maximum Wire Size mm²
0.56mm²
Serie
D-Sub Standard
Curent nominal
6.5A
Lungime
14.1mm
Maximum Wire Size AWG
20AWG
Minimum Wire Size AWG
24AWG
Tara de origine
Germany
Detalii produs
Harting Sub-D Connector Crimp Contacts and Tooling
From Harting, a range of Male and female contacts for crimping onto wires with cross sections between 28 - 20 AWG, suitable for Harting D-Sub connectors. The range also includes an appropriate crimp tool for use with male and female cut and formed contacts, and an insertion removal tool.
Standards
IEC 60 807