HARTING, D-Sub Standard Series, Female Crimp D-sub Connector Contact, PdNi Pin, 24 → 28 AWG
Documente tehnice
Specificatii
Marca
HartingSubtip
Female
Dimensiune fir
24 → 28 AWG
Material de contact
Brass
Terminal
Crimp
Placa contact
PdNi
Contact Type
Pin
Maximum Contact Resistance
≤10MΩ
Minimum Wire Size mm²
0.09mm²
Maximum Wire Size mm²
0.25mm²
Dimensiune celula
D-Sub Standard
Curent nominal
6.5A
Lungime
14.1mm
Minimum Wire Size AWG
28AWG
Maximum Wire Size AWG
24AWG
Tara de origine
Germany
Detalii produs
Harting Sub-D Connector Crimp Contacts and Tooling
From Harting, a range of Male and female contacts for crimping onto wires with cross sections between 28 - 20 AWG, suitable for Harting D-Sub connectors. The range also includes an appropriate crimp tool for use with male and female cut and formed contacts, and an insertion removal tool.
Standards
IEC 60 807
Informatii indisponibile despre stoc
Incercati din nou mai tarziu
€ 0,33
Buc. (Intr-un pachet de 25) (fara TVA)
€ 0,393
Buc. (Intr-un pachet de 25) (cu TVA)
25
€ 0,33
Buc. (Intr-un pachet de 25) (fara TVA)
€ 0,393
Buc. (Intr-un pachet de 25) (cu TVA)
25
Cumpara in pachete mari
| Cantitate | Pret unitar | Per Pachet |
|---|---|---|
| 25 - 75 | € 0,33 | € 8,25 |
| 100 - 225 | € 0,30 | € 7,50 |
| 250 - 475 | € 0,26 | € 6,50 |
| 500+ | € 0,25 | € 6,25 |
Documente tehnice
Specificatii
Marca
HartingSubtip
Female
Dimensiune fir
24 → 28 AWG
Material de contact
Brass
Terminal
Crimp
Placa contact
PdNi
Contact Type
Pin
Maximum Contact Resistance
≤10MΩ
Minimum Wire Size mm²
0.09mm²
Maximum Wire Size mm²
0.25mm²
Dimensiune celula
D-Sub Standard
Curent nominal
6.5A
Lungime
14.1mm
Minimum Wire Size AWG
28AWG
Maximum Wire Size AWG
24AWG
Tara de origine
Germany
Detalii produs
Harting Sub-D Connector Crimp Contacts and Tooling
From Harting, a range of Male and female contacts for crimping onto wires with cross sections between 28 - 20 AWG, suitable for Harting D-Sub connectors. The range also includes an appropriate crimp tool for use with male and female cut and formed contacts, and an insertion removal tool.
Standards
IEC 60 807