HARTING Heavy Duty Power Connector Insert, 16A, Male, Han E Series, 16 Contacts
Documente tehnice
Specificatii
Marca
HartingCurent nominal
16A
Subtip
Male
Serie
Han E
Tip produs
Connector Insert
Terminal
Screw
Pole Format
16P+E
Number Of Rows
2
Tensiune nominala
500 V
Numar contacte
16
Dimensiune filet
M3 x 10
Minimum Wire Size mm²
0.75mm²
Maximum Wire Size mm²
2.5mm²
Minimum Wire Size (mm²)
0.75mm²
Maximum Wire Size (mm²)
2.5mm²
Tara de origine
Germany
Detalii produs
Han E® Inserts
Warning
These connectors should not be mated or unmated under electrical load. Connectors of the same or different types arranged in a line should be polarised to prevent the possibility of wrong connection.
Approvals
UL, CSA, SEV
Han E® 16A Screw Series
These Han E® inserts are rated at 16A. They are intended for use with hoods and housings. All these hoods and housing ranges are associated to a specific Harting ’Size’ number identifier. See the ’compatibility’ table for details of this relationship, and stock numbers of hoods and housings that are typical of each range.
Informatii indisponibile despre stoc
Incercati din nou mai tarziu
€ 26,93
Buc. (fara TVA)
€ 32,05
Buc. (cu TVA)
1
€ 26,93
Buc. (fara TVA)
€ 32,05
Buc. (cu TVA)
1
Cumpara in pachete mari
| Cantitate | Pret unitar |
|---|---|
| 1 - 9 | € 26,93 |
| 10 - 24 | € 24,98 |
| 25 - 49 | € 23,76 |
| 50+ | € 22,60 |
Documente tehnice
Specificatii
Marca
HartingCurent nominal
16A
Subtip
Male
Serie
Han E
Tip produs
Connector Insert
Terminal
Screw
Pole Format
16P+E
Number Of Rows
2
Tensiune nominala
500 V
Numar contacte
16
Dimensiune filet
M3 x 10
Minimum Wire Size mm²
0.75mm²
Maximum Wire Size mm²
2.5mm²
Minimum Wire Size (mm²)
0.75mm²
Maximum Wire Size (mm²)
2.5mm²
Tara de origine
Germany
Detalii produs
Han E® Inserts
Warning
These connectors should not be mated or unmated under electrical load. Connectors of the same or different types arranged in a line should be polarised to prevent the possibility of wrong connection.
Approvals
UL, CSA, SEV
Han E® 16A Screw Series
These Han E® inserts are rated at 16A. They are intended for use with hoods and housings. All these hoods and housing ranges are associated to a specific Harting ’Size’ number identifier. See the ’compatibility’ table for details of this relationship, and stock numbers of hoods and housings that are typical of each range.