Documente tehnice
Specificatii
Marca
HartingSerie
TC 100
Tip accesoriu
Crimp Contact
Utilizare cu
Han GND Series
Raza actiune
Han HC
Curent nominal
100A
Minimum Wire Size mm²
16mm²
Maximum Wire Size mm²
35mm²
Subtip
Female
Terminal
Crimp
Tara de origine
Germany
Detalii produs
Han GND Screw Contacts
Han GND Range
The Harting Han GND range enables a pluggable grounding system, it is the solution for potential equalisation. It is now possible to execute grounding systems in a pluggable design for the first time. The advantage of this system is to enable quick and error free commissioning. Potential equalisation lines are still being permanently connected, which is relatively time consuming and can be subject to errors. The single pole connector in the durable IP65 plastic housing is designed for stranded wires from 10-35mm² and is optionally available in crimp or axial screw termination. The screw termination has the advantage of the lines being connected without a special tool.
Informatii indisponibile despre stoc
Incercati din nou mai tarziu
€ 17,99
Buc. (fara TVA)
€ 21,41
Buc. (cu TVA)
1
€ 17,99
Buc. (fara TVA)
€ 21,41
Buc. (cu TVA)
1
Cumpara in pachete mari
Cantitate | Pret unitar |
---|---|
1 - 9 | € 17,99 |
10 - 24 | € 16,89 |
25+ | € 16,33 |
Documente tehnice
Specificatii
Marca
HartingSerie
TC 100
Tip accesoriu
Crimp Contact
Utilizare cu
Han GND Series
Raza actiune
Han HC
Curent nominal
100A
Minimum Wire Size mm²
16mm²
Maximum Wire Size mm²
35mm²
Subtip
Female
Terminal
Crimp
Tara de origine
Germany
Detalii produs
Han GND Screw Contacts
Han GND Range
The Harting Han GND range enables a pluggable grounding system, it is the solution for potential equalisation. It is now possible to execute grounding systems in a pluggable design for the first time. The advantage of this system is to enable quick and error free commissioning. Potential equalisation lines are still being permanently connected, which is relatively time consuming and can be subject to errors. The single pole connector in the durable IP65 plastic housing is designed for stranded wires from 10-35mm² and is optionally available in crimp or axial screw termination. The screw termination has the advantage of the lines being connected without a special tool.