HARTING Han Contacts Male 100A Crimp Contact Minimum Wire Size 16mm² Maximum Wire Size 16mm² for use with Han GND Series
Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
HartingSerie
Han Contacts
Tip accesoriu
Crimp Contact
Utilizare cu
Han GND Series
Raza actiune
Han 100A Crimp, Han HC
Tensiune
1 kV
Curent nominal
100A
Minimum Wire Size mm²
16mm²
Subtip
Male
Maximum Wire Size mm²
16mm²
Terminal
Crimp
Tara de origine
Germany
Detalii produs
Han GND Crimp Contacts
Han GND Range
The Harting Han GND range enables a pluggable grounding system, it is the solution for potential equalisation. It is now possible to execute grounding systems in a pluggable design for the first time. The advantage of this system is to enable quick and error free commissioning. Potential equalisation lines are still being permanently connected, which is relatively time consuming and can be subject to errors. The single pole connector in the durable IP65 plastic housing is designed for stranded wires from 10-35mm² and is optionally available in crimp or axial screw termination. The screw termination has the advantage of the lines being connected without a special tool.
€ 116,80
€ 11,68 Buc. (Intr-un pachet de 10) (fara TVA)
€ 141,33
€ 14,133 Buc. (Intr-un pachet de 10) (cu TVA)
10
€ 116,80
€ 11,68 Buc. (Intr-un pachet de 10) (fara TVA)
€ 141,33
€ 14,133 Buc. (Intr-un pachet de 10) (cu TVA)
Informatii despre stoc temporar indisponibile
10
Informatii despre stoc temporar indisponibile
Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
HartingSerie
Han Contacts
Tip accesoriu
Crimp Contact
Utilizare cu
Han GND Series
Raza actiune
Han 100A Crimp, Han HC
Tensiune
1 kV
Curent nominal
100A
Minimum Wire Size mm²
16mm²
Subtip
Male
Maximum Wire Size mm²
16mm²
Terminal
Crimp
Tara de origine
Germany
Detalii produs
Han GND Crimp Contacts
Han GND Range
The Harting Han GND range enables a pluggable grounding system, it is the solution for potential equalisation. It is now possible to execute grounding systems in a pluggable design for the first time. The advantage of this system is to enable quick and error free commissioning. Potential equalisation lines are still being permanently connected, which is relatively time consuming and can be subject to errors. The single pole connector in the durable IP65 plastic housing is designed for stranded wires from 10-35mm² and is optionally available in crimp or axial screw termination. The screw termination has the advantage of the lines being connected without a special tool.