Greenwich Instruments 0.02 kW Motor Controller, 24 V, 3 Phase, 2 A
Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Number of Phases
3
Product Type
Motor Controller
Tensiune iesire
5 V
Tensiunea de alimentare
24 V
Curent nominal
2 A
Putere
0.02kW
Lungime totala
61mm
Latime totala
46mm
Adancime totala
15 mm
Temperatura maxima de lucru
65°C
Standards/Approvals
No
Tara de origine
United Kingdom
Detalii produs
GSM2 Stepper Motor Drive Board
The GSM2 is a standalone drive board designed to drive a stepper motor in unipolar mode. It is done either with or without forcing resistors connected between motor commons and volts. When using the logic connections, you are able to select full, half or wave mode and direction and speed external clock. The GSM2 drive board allows an enable and disable input for various start/stop control options. The stepper motor used with the board must also have four phases and five, six or eight wires.
Supplied with
User instructions
Informatii despre stoc temporar indisponibile
€ 192,22
€ 192,22 Buc. (fara TVA)
€ 232,59
€ 232,59 Buc. (cu TVA)
1
€ 192,22
€ 192,22 Buc. (fara TVA)
€ 232,59
€ 232,59 Buc. (cu TVA)
Informatii despre stoc temporar indisponibile
1
Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Number of Phases
3
Product Type
Motor Controller
Tensiune iesire
5 V
Tensiunea de alimentare
24 V
Curent nominal
2 A
Putere
0.02kW
Lungime totala
61mm
Latime totala
46mm
Adancime totala
15 mm
Temperatura maxima de lucru
65°C
Standards/Approvals
No
Tara de origine
United Kingdom
Detalii produs
GSM2 Stepper Motor Drive Board
The GSM2 is a standalone drive board designed to drive a stepper motor in unipolar mode. It is done either with or without forcing resistors connected between motor commons and volts. When using the logic connections, you are able to select full, half or wave mode and direction and speed external clock. The GSM2 drive board allows an enable and disable input for various start/stop control options. The stepper motor used with the board must also have four phases and five, six or eight wires.
Supplied with
User instructions