Facom Type H Small Mesh
Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
FacomProduct Type
Side cutter
Sub Type
Small Mesh
Lungime totala
110mm
Jaw Width
9mm
Lungime falca
9mm
VDE/1000V Approved
No
Siguranta inaltime
No
Application
Small Electronic Component
Siguranta ESD
No
Maximum Cutting Capacity
1mm
Standards/Approvals
NF ISO 9654, DIN ISO 9654, ISO 9654, ASME B107.500
Cut Type
Type H
Tara de origine
France
Detalii produs
Facom Micro-Tech Small Thin Cutters
This Micro-Tech series of small mesh cutters from Facom benefits from an exceptionally thin diagonal head (8 mm joint), which enables easy access to components and better visibility for work on high density circuits.
Types available are:
205-4813 - 405.8MT, 110 mm Semi-Flush Cutters, Copper and Nickel Ø: 0.2 - 1mm, Fe 30 HRc diam. 0,5mm
205-4829 - 406.8MT, 110 mm Semi-Flush Cutters, Copper and Nickel Ø: 0.1 – 1mm
205-4835 - 407.8MT, 110 mm Super Full Flush Cutters, Copper and Nickel Ø: 0.1 – 1mm
These Micro-Tech cutters features a flush cut that cuts through soft to medium hard wires quickly and efficiently. These cutters are able to cut through copper and nickel. Micro-Tech tools are specially designed by Facom for better gripping, cutting and handling of small components.
Informatii despre stoc temporar indisponibile
€ 84,52
€ 84,52 Buc. (fara TVA)
€ 102,27
€ 102,27 Buc. (cu TVA)
1
€ 84,52
€ 84,52 Buc. (fara TVA)
€ 102,27
€ 102,27 Buc. (cu TVA)
Informatii despre stoc temporar indisponibile
1
Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
FacomProduct Type
Side cutter
Sub Type
Small Mesh
Lungime totala
110mm
Jaw Width
9mm
Lungime falca
9mm
VDE/1000V Approved
No
Siguranta inaltime
No
Application
Small Electronic Component
Siguranta ESD
No
Maximum Cutting Capacity
1mm
Standards/Approvals
NF ISO 9654, DIN ISO 9654, ISO 9654, ASME B107.500
Cut Type
Type H
Tara de origine
France
Detalii produs
Facom Micro-Tech Small Thin Cutters
This Micro-Tech series of small mesh cutters from Facom benefits from an exceptionally thin diagonal head (8 mm joint), which enables easy access to components and better visibility for work on high density circuits.
Types available are:
205-4813 - 405.8MT, 110 mm Semi-Flush Cutters, Copper and Nickel Ø: 0.2 - 1mm, Fe 30 HRc diam. 0,5mm
205-4829 - 406.8MT, 110 mm Semi-Flush Cutters, Copper and Nickel Ø: 0.1 – 1mm
205-4835 - 407.8MT, 110 mm Super Full Flush Cutters, Copper and Nickel Ø: 0.1 – 1mm
These Micro-Tech cutters features a flush cut that cuts through soft to medium hard wires quickly and efficiently. These cutters are able to cut through copper and nickel. Micro-Tech tools are specially designed by Facom for better gripping, cutting and handling of small components.