Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
EnOceanComponent Type
Module
Supported Frequency Bands
868MHz
Maximum RF Data Rate
125kbit/s
Supported Bus Interfaces
UART, USB
Dimensiuni
66 x 23 x 9mm
Inaltime
9mm
Lungime
66mm
Temperatura maxima de lucru
+40 °C
Temperatura minima de lucru
0 °C
Latime
23mm
Tara de origine
Hungary
Detalii produs
USB Gateway Transceiver Module USB 300
USB 300 is a small USB stick which connects PCs and smart home servers to EnOcean wireless products. USB 300 is equipped with the TCM 310 transceiver gateway board and provides a bi-directional interface between an EnOcean ISM-band wireless channel and a USB serial bus. Radio messages are sent and received via an externally connected USB host. The USB 300 also provides signal strength information. Additional control commands can be sent from the host to USB 300, e.g. to configure repeater functionality.
Informatii despre stoc temporar indisponibile
€ 46,25
€ 46,25 Buc. (fara TVA)
€ 55,96
€ 55,96 Buc. (cu TVA)
1
€ 46,25
€ 46,25 Buc. (fara TVA)
€ 55,96
€ 55,96 Buc. (cu TVA)
Informatii despre stoc temporar indisponibile
1
Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
EnOceanComponent Type
Module
Supported Frequency Bands
868MHz
Maximum RF Data Rate
125kbit/s
Supported Bus Interfaces
UART, USB
Dimensiuni
66 x 23 x 9mm
Inaltime
9mm
Lungime
66mm
Temperatura maxima de lucru
+40 °C
Temperatura minima de lucru
0 °C
Latime
23mm
Tara de origine
Hungary
Detalii produs
USB Gateway Transceiver Module USB 300
USB 300 is a small USB stick which connects PCs and smart home servers to EnOcean wireless products. USB 300 is equipped with the TCM 310 transceiver gateway board and provides a bi-directional interface between an EnOcean ISM-band wireless channel and a USB serial bus. Radio messages are sent and received via an externally connected USB host. The USB 300 also provides signal strength information. Additional control commands can be sent from the host to USB 300, e.g. to configure repeater functionality.
