Crouzet Solid State Relay, 25 A Load, 530 V rms Load, 32 V Control
Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
CrouzetMaximum Load Current
25 A
Maximum Load Voltage
530 V rms
Minimum Control Voltage
4 V
Maximum Control Voltage
32 V
Control Voltage Range
4 → 32 V dc
Minimum Load Current
100 mA
Output Device
SCR
Load Voltage Range
48 → 530 V ac
Dimensiuni
103.89 x 79.74 x 35.43mm
Lungime
101.28mm
Temperatura de lucru
-40 → +80°C
Inaltime
35.43mm
Frecventa minima de auto-rezonanta
-40°C
Temperatura maxima de lucru
+80°C
Adancime
79.74mm
Tara de origine
Mexico
Detalii produs
GN0 Series Three Phase Motor Reversing Relay - DC Input
The GN0 solid-state relay is designed to reverse the direction of a motor by switching two of the three phases. Two legs of the three-phase network are wired to the output of the GN0, with the third leg being tied to the motor either directly or through a separate solid-state relay. When the control signal is applied to the input's forward (“F”) terminals, the output SCR's switch power to the motor. When the control signal is applied to the input's reverse (“R”) terminals, the two legs of the output are reversed. If the control signal is applied to both the forward and reverse terminals simultaneously, the outputs of the relay shut off.
Approvals
UL, CSA, TUV
Instantaneous Switching
Informatii despre stoc temporar indisponibile
P.O.A.
1
P.O.A.
Informatii despre stoc temporar indisponibile
1
Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
CrouzetMaximum Load Current
25 A
Maximum Load Voltage
530 V rms
Minimum Control Voltage
4 V
Maximum Control Voltage
32 V
Control Voltage Range
4 → 32 V dc
Minimum Load Current
100 mA
Output Device
SCR
Load Voltage Range
48 → 530 V ac
Dimensiuni
103.89 x 79.74 x 35.43mm
Lungime
101.28mm
Temperatura de lucru
-40 → +80°C
Inaltime
35.43mm
Frecventa minima de auto-rezonanta
-40°C
Temperatura maxima de lucru
+80°C
Adancime
79.74mm
Tara de origine
Mexico
Detalii produs
GN0 Series Three Phase Motor Reversing Relay - DC Input
The GN0 solid-state relay is designed to reverse the direction of a motor by switching two of the three phases. Two legs of the three-phase network are wired to the output of the GN0, with the third leg being tied to the motor either directly or through a separate solid-state relay. When the control signal is applied to the input's forward (“F”) terminals, the output SCR's switch power to the motor. When the control signal is applied to the input's reverse (“R”) terminals, the two legs of the output are reversed. If the control signal is applied to both the forward and reverse terminals simultaneously, the outputs of the relay shut off.
Approvals
UL, CSA, TUV
Instantaneous Switching