Documente tehnice
Specificatii
Marca
CrouzetMonitoring Application
Phase, Voltage
Faza electrica
3
Configurare contact
DPDT
Tensiune
194 → 528 V
Tensiune
Overvoltage, Undervoltage
Timp montare
DIN Rail
Phase Sensitivity
Phase Asymmetry, Phase Failure, Phase Sequence
Intarziere
0.1 → 10s
Serie
HWUA
Inaltime
92.6mm
Lungime
69mm
Minimum Voltage Sensed
194 V
Temperatura de lucru
+50°C
Temperatura minima de lucru
-20°C
Latime
35mm
Temperatura maxima de lucru
+50°C
Dimensiuni
69 x 35 x 92.6mm
Maximum Voltage Sensed
528V
Detalii produs
Multi Function Phase Control Relays 35mm - C-Lynx
The HWUA 3 phase network control relay monitors:- The correct sequence of phases L1, L2, L3,- Total phase failure,- Undervoltage and overvoltage from 2% to 20% of Under Voltage Relay,- Asymmetry rate from 5% to 15% of Under Voltage Relay,- Faults are signalled via LEDs, distinguishing the origin of the fault. If a fault persists for longer than the threshold crossing delay configured by the operator, both output relays open and LED R is extinguished.
Informatii indisponibile despre stoc
Incercati din nou mai tarziu
€ 237,30
Buc. (fara TVA)
€ 282,39
Buc. (cu TVA)
1
€ 237,30
Buc. (fara TVA)
€ 282,39
Buc. (cu TVA)
1
Cumpara in pachete mari
Cantitate | Pret unitar |
---|---|
1 - 4 | € 237,30 |
5 - 9 | € 223,30 |
10 - 24 | € 209,49 |
25 - 49 | € 195,95 |
50+ | € 182,61 |
Documente tehnice
Specificatii
Marca
CrouzetMonitoring Application
Phase, Voltage
Faza electrica
3
Configurare contact
DPDT
Tensiune
194 → 528 V
Tensiune
Overvoltage, Undervoltage
Timp montare
DIN Rail
Phase Sensitivity
Phase Asymmetry, Phase Failure, Phase Sequence
Intarziere
0.1 → 10s
Serie
HWUA
Inaltime
92.6mm
Lungime
69mm
Minimum Voltage Sensed
194 V
Temperatura de lucru
+50°C
Temperatura minima de lucru
-20°C
Latime
35mm
Temperatura maxima de lucru
+50°C
Dimensiuni
69 x 35 x 92.6mm
Maximum Voltage Sensed
528V
Detalii produs
Multi Function Phase Control Relays 35mm - C-Lynx
The HWUA 3 phase network control relay monitors:- The correct sequence of phases L1, L2, L3,- Total phase failure,- Undervoltage and overvoltage from 2% to 20% of Under Voltage Relay,- Asymmetry rate from 5% to 15% of Under Voltage Relay,- Faults are signalled via LEDs, distinguishing the origin of the fault. If a fault persists for longer than the threshold crossing delay configured by the operator, both output relays open and LED R is extinguished.