Crouzet Phase, Voltage Monitoring Relay, 3 Phase, SPDT, 183 → 528V ac, DIN Rail
Documente tehnice
Specificatii
Marca
CrouzetMonitoring Application
Phase, Voltage
Faza electrica
3
Tensiune
183 → 528V ac
Configurare contact
SPDT
Tensiune
Overvoltage, Undervoltage
Timp montare
DIN Rail
Phase Sensitivity
Phase Failure, Phase Imbalance, Phase Sequence
Intarziere
0.1 → 10s
Serie
MWUA
Dimensiuni
69 x 17.5 x 92.6mm
Temperatura de lucru
+50°C
Temperatura minima de lucru
-20°C
Latime
17.5mm
Temperatura maxima de lucru
+50°C
Maximum Voltage Sensed
528V ac
Lungime
69mm
Minimum Voltage Sensed
183V ac
Inaltime
92.6mm
Detalii produs
Multi Function Phase Control Relays 17.5mm - C-Lynx
3 phase network control relays monitor: the correct sequence of phases L1, L2, L3, the total phase failure - Undervoltage and overvoltage from 2% to 20% of Under Voltage Relay and Asymmetry rate from 5% to 15% of Under Voltage Relay. LEDs are used for fault signalling, if a fault persists for longer than the threshold crossing delay configured by the operator, the output relay opens and the LED R is extinguished.
Informatii indisponibile despre stoc
Incercati din nou mai tarziu
€ 204,97
Buc. (fara TVA)
€ 243,91
Buc. (cu TVA)
1
€ 204,97
Buc. (fara TVA)
€ 243,91
Buc. (cu TVA)
1
Cumpara in pachete mari
| Cantitate | Pret unitar |
|---|---|
| 1 - 4 | € 204,97 |
| 5 - 9 | € 192,85 |
| 10 - 24 | € 180,96 |
| 25 - 49 | € 171,87 |
| 50+ | € 165,81 |
Documente tehnice
Specificatii
Marca
CrouzetMonitoring Application
Phase, Voltage
Faza electrica
3
Tensiune
183 → 528V ac
Configurare contact
SPDT
Tensiune
Overvoltage, Undervoltage
Timp montare
DIN Rail
Phase Sensitivity
Phase Failure, Phase Imbalance, Phase Sequence
Intarziere
0.1 → 10s
Serie
MWUA
Dimensiuni
69 x 17.5 x 92.6mm
Temperatura de lucru
+50°C
Temperatura minima de lucru
-20°C
Latime
17.5mm
Temperatura maxima de lucru
+50°C
Maximum Voltage Sensed
528V ac
Lungime
69mm
Minimum Voltage Sensed
183V ac
Inaltime
92.6mm
Detalii produs
Multi Function Phase Control Relays 17.5mm - C-Lynx
3 phase network control relays monitor: the correct sequence of phases L1, L2, L3, the total phase failure - Undervoltage and overvoltage from 2% to 20% of Under Voltage Relay and Asymmetry rate from 5% to 15% of Under Voltage Relay. LEDs are used for fault signalling, if a fault persists for longer than the threshold crossing delay configured by the operator, the output relay opens and the LED R is extinguished.