Documente tehnice
Specificatii
Marca
CrouzetMonitoring Application
Phase, Voltage
Faza electrica
3
Configurare contact
SPDT
Tensiune
183 → 528V ac
Tensiune
Overvoltage, Undervoltage
Timp montare
DIN Rail
Phase Sensitivity
Phase Asymmetry, Phase Failure, Phase Sequence
Intarziere
0.1 → 10s
Dimensiune celula
MWG
Inaltime
92.6mm
Lungime
69mm
Minimum Voltage Sensed
183V ac
Temperatura de lucru
+50°C
Frecventa minima de auto-rezonanta
-20°C
Latime
17.5mm
Temperatura maxima de lucru
+50°C
Dimensiuni
69 x 17.5 x 92.6mm
Maximum Voltage Sensed
528V ac
Tara de origine
Indonesia
Detalii produs
Multi Function Phase Control Relays 17.5mm - C-Lynx
3 phase network control relays monitor: the correct sequence of phases L1, L2, L3, the total phase failure - Undervoltage and overvoltage from 2% to 20% of Under Voltage Relay and Asymmetry rate from 5% to 15% of Under Voltage Relay. LEDs are used for fault signalling, if a fault persists for longer than the threshold crossing delay configured by the operator, the output relay opens and the LED R is extinguished.
Informatii indisponibile despre stoc
Incercati din nou mai tarziu
€ 126,48
Buc. (fara TVA)
€ 150,51
Buc. (cu TVA)
1
€ 126,48
Buc. (fara TVA)
€ 150,51
Buc. (cu TVA)
1
Cumpara in pachete mari
Cantitate | Pret unitar |
---|---|
1 - 4 | € 126,48 |
5 - 9 | € 116,15 |
10 - 24 | € 109,32 |
25 - 49 | € 102,58 |
50+ | € 95,97 |
Documente tehnice
Specificatii
Marca
CrouzetMonitoring Application
Phase, Voltage
Faza electrica
3
Configurare contact
SPDT
Tensiune
183 → 528V ac
Tensiune
Overvoltage, Undervoltage
Timp montare
DIN Rail
Phase Sensitivity
Phase Asymmetry, Phase Failure, Phase Sequence
Intarziere
0.1 → 10s
Dimensiune celula
MWG
Inaltime
92.6mm
Lungime
69mm
Minimum Voltage Sensed
183V ac
Temperatura de lucru
+50°C
Frecventa minima de auto-rezonanta
-20°C
Latime
17.5mm
Temperatura maxima de lucru
+50°C
Dimensiuni
69 x 17.5 x 92.6mm
Maximum Voltage Sensed
528V ac
Tara de origine
Indonesia
Detalii produs
Multi Function Phase Control Relays 17.5mm - C-Lynx
3 phase network control relays monitor: the correct sequence of phases L1, L2, L3, the total phase failure - Undervoltage and overvoltage from 2% to 20% of Under Voltage Relay and Asymmetry rate from 5% to 15% of Under Voltage Relay. LEDs are used for fault signalling, if a fault persists for longer than the threshold crossing delay configured by the operator, the output relay opens and the LED R is extinguished.