Bourns, 1840 Surge Protector 24 V Maximum Voltage Rating 20kA Maximum Surge Current Signal & Data Line Protector
Documente tehnice
Specificatii
Marca
BournsTip supresor
Signal & Data Line Protector
Maximum Voltage Rating
24 V
Timp montare
DIN Rail
Curent supratensiune maxim
20kA
Serie
1840
Lungime
83.31mm
Adancime
18.8mm
Dimensiuni
83.31 x 18.8mm
Temperatura minima de lucru
-40°C
Temperatura maxima de lucru
+60°C
Detalii produs
Bourns 1800 Series Signal and data line Protection Devices
Surge Protection Devices, SPDs (DIN-rail)
Voltage surges, often referred to as spikes or transients are typically caused by switching of fluorescent lights, fuses blowing or nearby lightning activity. The worst voltage spikes are usually caused by lightning strikes and can reach up to 6000V, with current surges of over 3000A. The maximum size of the let-through voltage and current inrush depends on the location within the building's wiring system. BS7671: 2011 Amendment 1 Sections 443 and 534 cover risk assessment and provides guidance on protection of electronic equipment for installation engineers to follow. The fullest information on lightning and surge protection comes from the BSEN 62305 series of standards.
€ 190,35
€ 190,35 Buc. (fara TVA)
€ 226,52
€ 226,52 Buc. (cu TVA)
1
€ 190,35
€ 190,35 Buc. (fara TVA)
€ 226,52
€ 226,52 Buc. (cu TVA)
1
Informatii despre stoc temporar indisponibile
Incercati din nou mai tarziu
| Cantitate | Pret unitar |
|---|---|
| 1 - 9 | € 190,35 |
| 10 - 19 | € 173,07 |
| 20 - 24 | € 166,93 |
| 25 - 49 | € 161,05 |
| 50+ | € 155,45 |
Documente tehnice
Specificatii
Marca
BournsTip supresor
Signal & Data Line Protector
Maximum Voltage Rating
24 V
Timp montare
DIN Rail
Curent supratensiune maxim
20kA
Serie
1840
Lungime
83.31mm
Adancime
18.8mm
Dimensiuni
83.31 x 18.8mm
Temperatura minima de lucru
-40°C
Temperatura maxima de lucru
+60°C
Detalii produs
Bourns 1800 Series Signal and data line Protection Devices
Surge Protection Devices, SPDs (DIN-rail)
Voltage surges, often referred to as spikes or transients are typically caused by switching of fluorescent lights, fuses blowing or nearby lightning activity. The worst voltage spikes are usually caused by lightning strikes and can reach up to 6000V, with current surges of over 3000A. The maximum size of the let-through voltage and current inrush depends on the location within the building's wiring system. BS7671: 2011 Amendment 1 Sections 443 and 534 cover risk assessment and provides guidance on protection of electronic equipment for installation engineers to follow. The fullest information on lightning and surge protection comes from the BSEN 62305 series of standards.